User manual OREGON SCIENTIFIC FSP301

[. . . ] 18 Safety and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The measurement unit (°C or °F) and channel number (1, 2, or 3) switches are located in the battery compartment, and should be set prior to installation. If you are using more than one remote unit, be sure to select a different channel number for each unit. INSTALLATION Mount the remote unit on a flat surface using the recess hole on the back of the unit. For best results: · · Before you insert the batteries, select the measurement unit and channel number first. Place the unit out of direct sunlight and moisture. EN EN · · Do not place the remote unit more than 20 ­ 30 meters (60 ­ 90 feet) from the main (indoor) unit. Minimize obstructions such as doors, walls, and furniture. CLOCK This product can automatically synchronize the date and time with official time-keeping organizations in Frankfurt (Germany) and Rugby (England). When the unit is within 1500 km (932 miles) of a RF signal, the reception icon will blink during reception. SET RADIO SIGNAL FORMAT The RADIO SIGNAL FORMAT switch is located on the back of the product. 10 You may need to experiment with various locations to get the best reception. Strong signal Weak signal No signal TO DISABLE OR ENABLE AUTOSYNCHRONIZATION Press DOWN for 2 seconds to disable the autosynchronization. The unit will not respond to radio signals until you reactivate the synchronization. To enable auto-reception, press UP for 2 seconds. NOTE For best results, place the unit away from metal or electrical objects, and near a window with a clear view to the sky. SET OR CHANGE THE CLOCK Clock auto-synchronization must be deactivated before you manually set the clock. 11 EN EN 1. Select the 12/24-hour format, hour, minute, year, date/month format, month, date, and display language. Press CLOCK to confirm. ALARM When activated, the Beep Alarm starts quietly, then gradually becomes louder until it crescendos at 1 minute. SET ALARM NOTE The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish. 1. for Select the hour, minute, and alarm type ( Beep Alarm or for Ferrari Engine). Press UP or DOWN to change the setting. VIEW DAY OF WEEK OR SECONDS Press CLOCK. 12 3. Press ALARM to confirm. WEATHER FORECAST This product forecasts the next 12 to 24 hours of weather within a 30 to 50 km (19 - 31 mile) radius with 70 to 75 percent accuracy. Clear Partly Cloudy Cloudy Rainy SNOOZE Press SNOOZE/LIGHT to temporarily disable the alarm for 8 minutes. The alarm icon will blink while Snooze is activated. TO TURN THE ALARM OFF OR ON Press CLOCK, UP or DOWN. To turn the alarm off completely (deactivate it for the next day), press DOWN when the alarm time is displayed. 13 EN EN TEMPERATURE With the press of a button, you can check the current indoor or outdoor temperature, trend, and record measurements. CLEAR MIN / MAX MEASUREMENTS Press and hold MEMORY for 2 seconds until a beep sounds. 14 SELECT REMOTE UNIT CHANNEL Press CHANNEL to switch between CHANNEL 1, 2, 3, or indoor. [. . . ] Avoid dropping the unit or placing it in a location where the AC power adapter will be stepped on. WARNINGS This product is designed to give you years of service if handled properly. Observe the following guidelines: · Never immerse the unit in water. This can cause electrical shock and damage the unit. 18 · · · · · · · Do not subject the main unit to extreme force, shock, or fluctuations in temperature or humidity. [. . . ]