User manual OREGON SCIENTIFIC RM932-E

[. . . ] The RM932U --- the UK model --- will do the same when brought within range of the MSF60 radio signal from Rugby, UK. In addition to the local time and calendar display, the user can also select to display the corresponding time of 130 major world cities. This Clock also comes with favourable features including key-lock function, multilingual day-of-the-week display, EL back-light, hourly chime and dual alarm with 8-minute snooze function. [. . . ] For better reception, place the unit away from metal objects and electrical appliances to minimize interference. Should you wish to deactivate the RF controlled function, press and hold [RF CLOCK] button for 3 seconds. To reactivate the RF controlled function, press and hold [RF CLOCK] button for 3 seconds again and the radio reception icon will be re-displayed. - Strong - Weak - No Reception - Receiving 4 SETTING THE CLOCK AND CALENDAR CLOCK MANUALLY 1. Select the local city by using the rotary knob [UP]/[DOWN] button (for city names abbreviation, please refer to the section "Selecting the World Time"). Repeat the same procedures to set the hours, minutes, year, month, day, language of day-of-week and hourly-chime on/off by using [UP]/[DOWN] button. For the language for day-of-week, you can select "E" for English, "D" for German, "F" for French, "I" for Italian or "S" for Spanish. The day-of-week can be expressed as an abbreviation in five different languages. The languages and their selected abbreviations for each day of the week are shown in the language chart below. Day-of-the-week Language English German French Italian Spanish Monday Tuesday Wed. Thursday Friday Saturday Sunday Note: When changes are made to the minute, the seconds will start from zero. The unit will also save all changes and return to normal display automatically after the unit has been left idle for a minute. ABOUT THE HOURLY-CHIME FUNCTION When the Hourly-Chime is set to the on-mode, the indicator [ ] will light up and a beep sound will be given out at the beginning of each hour. 5 GB GB SETTING THE ALARM This clock is equipped with 2 alarms: Weekday Alarm and Single Alarm. For the Weekday Alarm, alarm will only sound out at the preset times during weekday (i. e. , from Monday to Friday) and will be automatically disabled during the weekend (i. e. , Saturday and Sunday). To deactivate the alarm, press the [ALARM ON/OFF] button when the corresponding alarm time is displayed. [ -: -- ] will be displayed to indicate such deactivation. ALARM AND SNOOZE FUNCTION An alarm will go off for 2 minutes in two-step crescendo patterns if undisturbed. The Alarm-On indicator will flash and the back-light will be activated for 5 seconds. When the snooze function is activated, the alarm will be muted temporarily and set off again after 8 minutes. To disable the snooze function when the alarm goes off, you can press and hold the [SNOOZE/LIGHT] button for 3 seconds. [. . . ] Doing so will terminate the unit's warranty and may cause damage. Clock format SPECIFICATIONS Proposed operating range Radio Control : : -5. 0°C to +50. 0°C (23. 0°F to 122. 0°F) Auto synchronize current time and date by Radio signal form Frankfurt, Germany DCF-77 (the UK Version from Rugby, England MSF - 60) 24-hour format (hh:mm:ss) 12-hour format for UK Version Calendar format Alarm : : Day-Month-Year Single and Weekday 2-minute crescendo Alarm with 8-minute snooze function Uses two (42) UM-4 or "AAA" 1. 5V batteries 150. 63gm (without battery) (L)112. 5x(W)86x(T)25. 8mm : Power Weight Dimensions With Carrying Pouch : : : 13 GB GB EC-DECLARATION OF CONFORMITY This product complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directives, if used for its intended use and that the following standard(s) has/have been applied: Efficient use of radio frequency spectrum (Article 3. 2 of the R&TTE Directive) applied standard(s) N/A Electromagnetic compatibility (Article 3. 1. b of the R&TTE Directive) applied standard(s) ETS 300 683:1997 Safety of information technology equipment (Article 3. 1. a of the R&TTE directive) applied standard(s) EN 60950:1997 14 Additional information: The product therefore conforms with the Low Voltage Directive 73/ 23/EC, the EMC Directive 89/336/EC and R&TTE Directive 1999/ 5/EC (appendix II) and carries the respective CE marking. CAUTION VS-Villingen / Germany August 2001 Gerhard Preis R&TTE representative of manufacturer - The contents of this manual and technical specifications are subject to change without further notice. - Due to printing limitation, the displays shown in this manual may differ from the actual display. [. . . ]