User manual OREGON SCIENTIFIC WMR968

[. . . ] CABLE FREETM WEATHER STATION MODEL: WMR968 SECTION 2 INSTALLATION The WMR968 operates at 433MHz. Position the units within range and be sure the transmission path is clear of interference and obstacles. NOTE The anemometer, thermo-hygrometer and rain gauge should be installed outdoors and in locations that best measure the weather elements the instruments are designed for. If you have any optional thermo or thermo-hygro sensors, they can be installed outdoors or indoors. User Manual SECTION 1 INTRODUCTION Congratulations on purchasing the WMR968 Cable FreeTM Weather Station. [. . . ] To display the dew point temperature, press the indoor temperature window until the "DEW" indicator is displayed. Press the indoor temperature window or repeatedly until the "DEW" icon appears. The time and date of the record will also be displayed alternatively with the "STAMP" icon in the clock window. The display will automatically return to the current temperature or dew temperature whatever is previously displayed if the unit is left untouched for about one minute. Press the indoor temperature window or repeatedly until the "DEW" icon appears. Press [MEMORY] to check the memory is clear. The temperatures can be displayed in degrees Centigrade (°C) or Fahrenheit (°F). The selected unit will apply to all temperature displays in this window. NOTE The unit of all temperature related displays will change simultaneously. Press the outdoor/channel temperature window or repeatedly until the "DEW" icon appears. Press [CHANNEL] for the outdoor thermo-hygrometer or the desired channel. The time and date of the record will also be displayed alternatively with the "STAMP" icon in the clock window. To display the dew point temperature for a channel, press the window again when the channel temperature is located. Press the outdoor/channel temperature window or repeatedly until the "DEW" icon appears. Press [CHANNEL] for the outdoor thermo-hygrometer or the desired channel. Press [CHANNEL] to go from the outdoor reading taken by the outdoor thermo-hygrometer to those taken by individual sensors (Channel 1, 2 or 3). The outdoor thermo-hygrometer is also capable of detecting the dew point temperature as well as the wind chill reading. 5 WMR968_EN_output 5 12/17/2004, 15:05 EN EN AUTO SCANNING FUNCTION The auto scanning function is available for the outdoor/ channel window for both the temperature and humidity. The main unit will start scanning from the active temperature and humidity display. To exit the auto scanning routine, press any window or control button. To clear the record, 1. As for the wind direction, it is displayed in a digital compass with bearing readouts. WEATHER ALARMS Weather alarms are used to alert you to certain weather conditions. Once activated, the alarm will go off when a certain set of criterion is met. You can set alarms for: RAINFALL The rate of rainfall can be displayed in mm/hr or in/hr. [. . . ] If the unit comes in contact with water, dry it immediately with a soft lint-free cloth. Do not clean the unit with abrasive or corrosive materials Abrasive cleaning agents may scratch the plastic parts and corrode the electronic circuit. Do not subject the unit to excessive: force, shock, dust, temperature, or humidity. Such treatment may result in malfunction, a shorter electronic life span, damaged batteries, or distorted parts. [. . . ]