User manual PANASONIC AJ-HPM110P

[. . . ] For details, see page 12. Operating Instructions Memory Card Portable Recorder/Player Model No. Model No. AJ-HPM110P AJ-HPM110E DEUTSCH FRANÇAIS ITALIANO ESPAÑOL Für Erlauterungen in Deutsch, konsultieren Sie bitte die mitgelieferte CD-ROM. Pour des explications en français, veuillez vous reporter au CD-ROM fourni. Para la explicación en español, consulte el CD-ROM uministrado. Before operating this product, please read the instructions carefully and save this manual for future use. · AVC-Intra capability is available when the optional AVC-Intra Codec board AJ-YBX200G is installed to the unit. S1207T0 -P D Printed in Japan ENGLISH VQT1Q19 Read this first! For AJ-HPM110P THIS EQUIPMENT MUST BE GROUNDED To ensure safe operation, the three-pin plug must be inserted only into a standard three-pin power outlet which is effectively grounded through normal household wiring. [. . . ] 5 Use the cursor buttons to choose [OPERATION] ­ [APPEND SELECTED CLIP]. NOTE: · A channel switch is indicated by "EDITED" in the A CH field. The status after the switch also shows up in the event property. For details, refer to "Viewing Event Information" (page 98). Using Play List: Creating Play Lists 75 6 Press the SET button. This registers an event where the start of the clip is the IN point and its end is the OUT point. For details, refer to "Changing Event IN and OUT Points" (page 81). NOTE: · When the selected clip has a different format from that of the current play list, an error occurs and the clip cannot be registered. · In the play list screen, you can also hold down the SHIFT button and press the ENTRY button to add a clip as an event. · When added events exceed 100, no more events can be added. 5 Register an IN point. Use the operation buttons or search dial to look for a location to start an event. Then hold down the IN button and press the ENTRY button. 6 Register an OUT point. Use the operation buttons or search dial to look for a location to end an event. Then hold down the OUT button and press the ENTRY button. Registering Events From Video You can specify an IN point and OUT point while playing back a video and register this as an event. 7 Repeat steps 5 and 6 as necessary to register other events. 8 Press the EVENT button to end registration. The INSERT button will also terminate registration. NOTE: 8 1 · Set the IN point and OUT point so that the resulting event has a duration of at least 10 frames. If a shorter events are registered in succession, playback may not be made correctly. · If the event following the event where the cursor is located has not been registered, the auto event increment function will increment the event number by one. · If a registered event spans multiple clips, the events are registered separately. 00:00:01:15 2, 3 5 6 4 5, 6 IN 00:00:01:00 OUT 00:00:03:29 1 Open the play list screen. 2 Enter the insert edit mode. Press the MENU button, use the cursor buttons to select [SETTING] ­ [INSERT MODE], and press the SET button. Move the cursor to [INSERT] and then press the SET button. CLIP1 CLIP2 EVENT EVENT1 EVENT2 · The registered content will be neglected if the unit is turned off during registration of an event from video. · If the IN and OUT points become reversed, the beginning of the clip is registered as the IN point. 3 Use the cursor buttons to place the cursor where you want to insert an event or in a line where no event is registered. 4 Press the INSERT button. This activates the event register mode. On the line with no event registered, the EVENT button can be used to enter the event register mode, regardless of the insert mode setting. On the line with an event registered, pressing the EVENT button engages the event edit mode, regardless of the insert mode setting. 76 Using Play List: Creating Play Lists Importing and Adding to Existing Play List Files This section describes how to import play lists stored on a P2 card and how to add an event at the cursor location. NOTE: · You cannot import a play list file whose format differs from the format of the current play list. · If the number of selected events exceeds 100, the events that exceed the limit will not be imported. · Press the right cursor button (a) in the file import screen to view the playlist name. Press the left cursor button (b) to view file names. 1 Open the play list screen. 2 Use the cursor buttons to choose the location where you want to insert the event. Using Play List 3 Press the MENU button. 4 Use the cursor buttons to choose [FILE] ­ [APPEND]. 5 Use the cursor buttons to select the number of the P2 card slot containing the play list you want to import and press the SET button. 6 Select a file in the file import screen and press the SET button. The specified play list event is added at the cursor location. Using Play List: Creating Play Lists 77 Saving Play Lists Naming Play Lists Use the steps below to name play lists. Saving a Play List to a P2 Card Use the steps below to save a play list stored by the unit in the play list area of memory to a P2 card. 1 Open the play list screen. 3 Use the cursor buttons to choose [OPERATION] ­ [CHANGE PLAYLIST NAME] and press the SET button. 1 Open the play list screen. 3 Use the cursor buttons to choose [FILE] ­ [SAVE AS]. 4 Use the on-screen keyboard to enter a name and press OK. 4 Use the cursor buttons to select the number of the P2 card slot that will store the file and press the SET button 5 Check the file name in the save file screen, choose [YES] and press the SET button. 5 Close the menu and register the name in PLAYLIST NAME. [. . . ] 75 EDIT COPY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 CHANGE PLAYLIST NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 EDIT AUDIO CH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 PROPERTY EVENT PROPERTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]