User manual PANASONIC LUMIX DMC-G1K CARACTERISTIQUES TECHNIQUES

[. . . ] Operating Instructions Digital Camera/Lens Kit Model No. DMC-G1K Before use, please read these instructions completely. Web Site: http://www. panasonic-europe. com EB VQT1U44 until 2008/11/ 1 Before Use Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read these Operating Instructions carefully and keep them handy for future reference. Before Use Information for Your Safety WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Carefully observe copyright laws. [. . . ] (P83) VQT1U44 81 Advanced (Recording pictures) [REC] mode: Change tone of the colour for the picture to be taken (Film mode) [You can only select [STANDARD] and [STANDARD] ( ) in [ ], [], [ ], [ ], [ ], [ ] and [ ] mode. ] Every type of film for film cameras has its own colour tone and contrast characteristics. In film mode, you can select the colour tone of the pictures from 9 types in the same way as you would select different films for film cameras. Select different settings in film mode to match the recording situation and your picture of the recording. Press [FILM MODE]. A [FILM MODE] button Press 2/1 to select an item. You can also use the front dial to select. When you press [DISPLAY] on the screen shown right, explanations about each film mode are displayed. (When you press [DISPLAY] again, the screen returns to the previous screen. ) Press [MENU/SET] to set. You can also press the shutter button halfway to set. Item [STANDARD] (COLOUR) [DYNAMIC] (COLOUR) [NATURE] (COLOUR) [SMOOTH] (COLOUR) [NOSTALGIC] (COLOUR) [VIBRANT] (COLOUR) [STANDARD] ( [DYNAMIC] ( [SMOOTH] ( ) ) ) Effect This is the standard setting. It will take pictures changing the type of film in accordance with the setting every time the shutter button is pressed. (Up to 3 pictures) [MY FILM 1]/[MY FILM 2] [MULTI FILM] 82 VQT1U44 Advanced (Recording pictures) Note In film mode, the camera may do something equivalent to pull processing or push processing to create a picture with particular characteristics. The shutter speed may become very slow at this time. Adjusting each film mode to the desired setting You can also set from the quick menu. Press 3/4 to select an item and 2/1 to adjust. You can also use the front dial to adjust. Registered settings are memorised even if the camera is turned off. Press [FILM MODE], press 3/4 to select an item, and then press [MENU/SET]. You can register 2 settings. ([MY FILM 1] and [MY FILM 2]) (After registering, the film mode name that was registered previously is displayed. ) [STANDARD] is registered in [MY FILM 1] and [STANDARD] ( ) is registered in [MY FILM 2] at the time of purchase. Item Effect Increases the difference between the brightness and the [r] darkness in the picture. [s] [SHARPNESS] [SATURATION] Decreases the difference between the brightness and the darkness in the picture. [CONTRAST] [r] The picture is sharply defined. You can obtain pictures with higher resolution. [NOISE RED. ] [s] Note Noise may become visible when you take pictures in dark places. To avoid picture noise, we recommend setting [NOISE RED. ] towards [_] or setting the items except [NOISE RED. ] towards [`] to take pictures. If you adjust a film mode, [_] is displayed beside the film mode name on the LCD monitor/ Viewfinder. You cannot adjust [SATURATION] in the black and white settings in film mode. Film mode cannot be adjusted in the Intelligent auto mode, advanced scene mode and scene mode. VQT1U44 83 Advanced (Recording pictures) Multi film bracket It will take pictures changing the type of film in accordance with the setting every time the shutter button is pressed. Select either [MULTI FILM 1], [MULTI FILM 2], or [MULTI FILM 3] with 3/4, and then select the film to be set for each with 2/1. You can also use the front dial to set. [OFF] can be selected only for [MULTI FILM 3]. Press [MENU/SET] to set. You can also press the shutter button halfway to set. Note [STANDARD] is registered in [MULTI FILM 1], [STANDARD] ( ) is registered in [MULTI FILM 2] and [OFF] is registered in [MULTI FILM 3] at the time of purchase. White balance bracket will be disabled when the multi film bracket is set. [. . . ] It is a sound of lens movement or aperture operation when the power is turned [ON] or [OFF], and it is not a malfunction. You may hear a sound from the lens and image in the LCD monitor may suddenly change when the brightness has changed by zoom operation or moving the camera, but there is no effect on recording. This is not a malfunction. An unreadable language was selected by mistake. > Press [MENU/SET], select the [SETUP] menu icon [ the desired language. (P34) ] and then select the [~] icon to set Part of the picture is flashing in black and white. A red lamp sometimes turns on when the shutter button is pressed halfway. [. . . ]