User manual PANASONIC KX-T3155

[. . . ] For ordering, call toll free: 1-800-332-5368 Part Number KX-A401 KX-A402 QUMH00003Z QUHS00012Z PSLP1380Z PSWET7775MU Description Fascia - polished brass Fascia - brushed stainless steel Interface bracket Gasket AC Adaptor Power Module Wall Mounting Template 1. If you mount the unit on a concrete or mortar wall, fit anchor plugs (not included) into the wall with a hammer beforehand. DRILL HOLE HERE IF ATTACHING FRONT OF UNIT DIRECTLY TO WALL 116 mm (49/16") 84 mm (35/16") DRILL HOLES HERE WHEN ATTACHING INTERFACE BRACKET TO WALL DRILL HOLE HERE IF ATTACHING FRONT OF UNIT DIRECTLY TO WALL 2 15 FCC and Other Information Specifications Power: AC Adaptor Input/Output: Power Module Input: Output: Doorphone (DP) Input: Cable Diameter/Length: 120 V AC 60 Hz/24 V DC, 300 mA 24 V DC 17 V at 60 mA DC 17 V at 60 mA DC 0. 4mm - 210 m (AWG 26 - 689 ft) 0. 5mm - 340 m (AWG 24 - 1115 ft) 0. 6mm - 500 m (AWG 22 - 1640 ft) Illuminated Button: Surface-mountable: Recess mountable: Connections: Power Module: RJ11 Input DC Input Terminal Block Output Doorphone: Terminal Block Input Terminal Block Output Dimensions (H x W x D): Weight: from PBX Doorphone Card Power Supply DC +24 V Door 1 to KX-T7775 Door 1 Doorbell In Doorbell Out 130 mm x 85 mm x 51 mm (51/8" x 33/8" x 2") 0. 4 kg (0. 89 lb) Yes Yes Yes 2 2 2 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: n Reorient or relocate the receiving antenna. n Connect the equipment into an outlet or a circuit different from that to which the receiver is connected. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications made to this product not expressly approved by Panasonic Communications Co. could void the user's authority to operate the equipment. Note: Specifications are subject to change. Location n Exposure to direct sunlight can result in the discoloration of the Doorphone Unit. n The Doorphone Unit can be mounted externally and is weatherresistant, but it should not be subjected to direct contact with water. n Maximum operating temperature range is -20°C to +50°C (-4°F to +122°F). n When inserting screws avoid pipes and electrical cables, etc, that may be present/buried. 14 3 Installation n Notes: 1. A Doorphone Card must be inserted in the PBX before you can install the Doorphone. This Doorphone manual should be read in conjunction with the relevant PBX manual. Slots and openings in the cabinet, at the back or bottom, are provided for ventilation; to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or other heat source. This product should not be placed in a built-in installation unless proper ventilation is provided. This product should be operated only from the type of power source indicated on the product label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. Do not locate this product where the cord will be abused by people walking on it. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. Max 500 m (1640 ft) 22 AWG Figure 2 - Doorphone Module's Interconnects PBX DOORPHONE CARD POWER MODULE Refer to pages 6 to 8 for pin details. 2 3 MODULAR 4 JACK 5 AC ADAPTOR Note: Polarity sensitive. DOOR 1 Max 500 m (1640 ft) 22 AWG Figure 3 - Power Module's Interconnects 12 5 POWER MODULE 1 MODULAR JACK MODULAR PLUG POWER MODULE 2 MODULAR JACK MODULAR PLUG KX-TD816/KX-TD1232/ KX-TA1232 (using KX-TD161 DP Interface) and KX-TA308/KX-TA624/ KX-T30810/KX-T61610/ KX-T123211 Adjusting the Sensitivity of the Microphone Where there is a lot of background noise, for example, due to traffic or machinery, it may be necessary to adjust the sensitivity of the microphone. To adjust the sensitivity of the microphone: Insert flat-headed screwdriver here. [. . . ] To adjust the sensitivity of the microphone: Insert flat-headed screwdriver here. Locate the switch. REAR OF UNIT TAB UPWARDS 2345 NOT USED NOT USED TAB UPWARDS 2345 NOT USED NOT USED DOORPHONE MODULE n + PBX DOORPHONE CARD n PQJS1T30ZA-E MODULAR JACK 2 4 6 1 3 5 Turn the switch clockwise (-) if sited in a noisy location. Turn the switch counter clockwise (+) for normal noise level (factory setting). Note: Power Module 2 is not available with KX-TA308/KX-T30810/KX-T61610/KX-T123211. Figure 4 - KX-TD816/KX-TD1232/KX-TA1232 (using KX-TD161 DP Interface) and KX-TA308/KX-TA624/KX-T30810/KX-T61610/ KX-T123211: Connection Details POWER MODULE 1 MODULAR JACK Operation Calling from doorphone: 1. Dial the Doorphone's extension number, refer to your PBX User Manual for this number. CALL BUTTON POWER MODULE 2 MODULAR JACK MODULAR PLUG KX-TD500 MODULAR PLUG Figure 12 TAB UPWARDS PBX DOORPHONE CARD MODULAR JACK 2345 NOT USED 234 5 NOT USED TAB UPWARDS NOT USED NOT USED PQJS1T30ZA-E 2 1 3 5 4 6 6 Figure 5 - KX-TD500: Connection Details 11 5. [. . . ]