User manual PANASONIC KX-FP151GRW

[. . . ] L In the event of problems, you should contact your equipment supplier in the first instance. L This equipment is designed for use on the UK and Republic of Ireland analogue telephone network. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting: http://www. doc. panasonic. de Contact: Panasonic Services Europe a Division of Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Copyright: L This material is copyrighted by Panasonic Communications Co. , Ltd. , and may be reproduced for internal use only. [. . . ] The unit will then send the data to each party, calling each number sequentially. L After transmission, the stored document will be erased from memory automatically, and the unit will automatically print a report (broadcast sending report). Note: L If you select "FINE", "SUPER FINE", "PHOTO" or "MIXED" resolution, the number of pages that the unit can send will decrease. L If the document exceeds the memory capacity, sending will be cancelled. L If a party is busy or does not answer, it will be skipped and redialled later up to 5 times. Press {STOP} repeatedly until "SEND CANCELLED?" is displayed. Press {SET}. 1 Press {>}. L Confirm that there are no documents in the document entrance. 2 Press {A} or {B} repeatedly to display the desired broadcast memory ("<BROADCAST1>", "<BROADCAST2>" or "<MANUAL BROAD>"). 3 Press {MENU}. 5 Press {A} or {B} repeatedly to display the desired item you want to add. 6 Press {SET}. L To add other items, repeat steps 5 and 6 (up to 20 items). 7 Press {STOP} to exit. Note: L When adding new items to the MANUAL BROADCAST memory, you can only select stored items. 4. 4. 3 Erasing a stored item from the broadcast memory 1 Press {>}. L Confirm that there are no documents in the document entrance. 2 Press {A} or {B} repeatedly to display the desired broadcast memory ("<BROADCAST1>", "<BROADCAST2>" or "<MANUAL BROAD>"). 3 Press {MENU}. 5 Press {A} or {B} repeatedly to display the desired item you want to erase. 7 Press {SET}. L To erase other items, repeat steps 5 to 7. 8 Press {STOP} to exit. 4. 4. 4 Sending the same document to preprogrammed parties 1 Insert the document FACE DOWN. Note: L To receive fax documents using an extension telephone, make sure remote fax activation is turned ON (feature #41 on page 44) beforehand. "INCOMING CALL" will be displayed but the unit will not ring. The unit will wait for the duration of 2 rings before answering the call. L The number of rings is determined by the "TEL/FAX delayed ring setting" (feature #78 on page 46). When a fax calling tone is detected The unit receives the fax automatically without ringing. L The number of rings is determined by the "Silent fax recognition ring setting" (feature #30 on page 44). L Callers will hear a ring back tone different from the one generated by the telephone company. L An extension telephone (if connected to the same line) will not ring at this time. To answer the call with the extension telephone, lift the handset and press {*}{0} (default auto disconnection code) while the fax machine is ringing. B If you do not answer the call, the unit will activate the fax function. L Some fax machines do not generate fax calling tones when sending faxes, therefore the unit will try to receive a fax even if no fax calling tone is detected. [. . . ] Note: L The image area changes with the depth, thickness and size of the characters. L If you turn on the toner save feature, the toner cartridge will last approx. General Information Drum life The drum unit is a consumable item and needs to be replaced regularly. There are various factors that determine the actual drum life, such as temperature, humidity, type of paper and how much toner you use for the number of sheets per print job. [. . . ]