User manual PANASONIC KX-FT907BX

[. . . ] For the Republic of Ireland, please call 01 6130082 Please have your serial number and D. Your name Company name (if applicable) Your address Your postcode Telephone no. Model no. Day Month Year Fax no. Serial no. Date of purchase 2. For information on Warranty Upgrades please contact us on 08701 580560 or, for the Republic of Ireland, please call 01 6130082 TERMS AND CONDITIONS 1. [. . . ] 45) Turn AUTO ANSWER on by pressing PQ. Activating an answering machine (p. 46) Connect an external telephone answering machine and change the ring setting of the answering machine to less than 4. q Change Set the unit this way. ON the ring setting in FAX ONLY mode of the fax machine to more than 4, if you use with AUTO ANSWER on. This is how the unit will operate. When receiving calls: All incoming calls will be answered as faxes. When receiving phone calls: The answering machine will record voice messages. When receiving faxes: The fax machine will disconnect the answering machine and receive documents. 42 Receiving Faxes Mostly phone calls Other option Remote fax activation You can also receive a fax using an extension telephone. While hearing a fax calling tone with an extension telephone, press *#9 (preselected fax activation code) to receive a fax (p. 47). Ring Ring Ring You plan to answer the calls yourself. TEL mode (p. 44) Turn AUTO ANSWER off by pressing PQ. OFF When receiving calls: You have to answer all calls manually. To receive a fax document, press i for each fax you are receiving. 43 Receiving Faxes TEL mode!(answering all calls manually) Activating TEL mode If the FAX ON light is on, turn it off by pressing PQ. Display: AAAATEL MODE Receiving a fax manually 1 2 When the unit rings, lift the handset to answer the call. When: -- document reception is required, -- a fax calling tone (slow beep) is heard, or -- no sound is heard, press i. q The unit will start fax reception. Note: you do not answer the call within 10 rings, the unit will temporarily switch to fax reception. Display: !!!STANDARD 1 Document guides STOP RESOLUTION Document cover Using the scanner glass q Confirm that there are no documents in the auto document feeder. Place the document FACE DOWN on the scanner glass, matching the top edge of the document to the " " mark on the unit. necessary, press u repeatedly to select the desired setting (see below). q Make sure the handset is on the cradle. q If Scanner glass STOP RESOLUTION COPY START To select the resolution Select the desired resolution according to the type of document. 2 3 q Do Press d. 100% FINE [01] COPY:PRESS START q If necessary, enter the number of copies (up to 99). ­ FINE: For printed or typewritten originals with small printing. ­ PHOTO: For originals containing photographs, shaded drawings, etc. you select "STANDARD", copying will be done using "FINE" mode. q The unit will start copying. Note: not open the document cover when making a copy with the auto document feeder. q To make a clear copy from transparencies, be sure to use the scanner glass. Place a blank sheet of paper on the top of the transparency, and leave the document cover open during copying. To stop copying Press {. 48 FA DO CE WN COPY START Copying To enlarge a document The unit can enlarge copies to as much as 200% of the original by changing the enlargement rate 5% at a time. After step 2 on page 48, press + repeatedly to select the desired enlargement rate, then press d. [. . . ] Try using the other side of the paper if you are not happy with the print quality or if misfeeding occurs. q For proper feeding and best print quality, we recommend using long-grained paper. q Do not use paper printed from this unit for double-sided printing with other copiers or printers. q To avoid curling, do not open paper packs until you are ready to use the paper. [. . . ]