User manual PANASONIC KXHNS101

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC KXHNS101. We hope that this PANASONIC KXHNS101 user guide will be useful to you.


PANASONIC KXHNS101 : Download the complete user guide (1196 Ko)

You may also download the following manuals related to this product:

   PANASONIC KXHNS101 (12625 ko)

Manual abstract: user guide PANASONIC KXHNS101

Detailed instructions for use are in the User's Guide.

[. . . ] This document explains how to install the window/door sensor properly. For details about how to use the system, refer to the User’s Guide (page 17). Please read this document before using the unit and save it for future reference. A B C *1 *2 *3 A Accessory item/Part number Battery*1 Mounting screws (20 mm (25/32 inches))*2/XMM38+20VW Mounting double-sided tapes*3 Quantity 1 4 3 When replacing the battery, see “Power source” of “Specifications”, page 18 for battery information. [. . . ] Wireless communication range The wireless communication range of each device in the system from the hub is approximately 50 m (160 feet) indoors and approximately 300 m (1, 000 feet) outdoors. Wireless communication may be unreliable when the following obstacles are located between the hub and other devices. R Metal doors or screens R Walls containing aluminum-sheet insulation R Walls made of concrete or corrugated iron R Double-pane glass windows R Multiple walls R When using each device on separate floors or in different buildings Note: R You can check the window/door sensor’s communication status by N. If the LED indicator pressing M is lit in green or red, the sensor is communicating properly with the hub. Com/support Setup Temporary placement Before installing the window/door sensor, temporarily place it in the desired location and confirm that it operates properly by pressing M N. Important: R Attach the sensor unit to the outer frame of the window or door, and the magnet unit to the inner frame. R Attach both units so that the “ ” marks point toward each other and are within 25. R The window/door sensor will not operate properly if the “ ” marks are too far apart or are facing the wrong way. Confirming proper operation After temporarily placing the window/door sensor in the desired location, press N while the window or door is closed. indicator Green , lit Red , lit Status The installation position is correct. The “ ” marks on the sensor unit and the magnet unit are too far from each other. Re-attach the sensor unit and the magnet unit so that they point directly at each other and are no more than 25. Red, blinking Note: R Depending on the condition and material of the surface where the sensor unit and magnet unit are installed, the LED indicator may light in red even if the “ ” marks point directly at each other and are no more than 25. Com/support 11 Setup Example 1: Installed on the left of the window Correct Incorrect 1 “ ” marks point directly at each other and are within 25. {xC} GREEN 1 RED 2 3 “ ” marks are aligned but units are too far apart. Com/support Setup Example 2: Installed on the right of the window Correct Incorrect 1 “ ” marks point directly at each other and are within 25. 1 GREEN {xC} 2 RED {xC} 3 “ ” marks are aligned but units are too far apart. Com/support 13 Setup Installation Install the window/door sensor in the same position where proper operation was confirmed (page 11). You can install the window/door sensor using screws or double-sided tape, depending on your preference or the material of the installation area. Note: R When installing, make sure the battery is inserted properly and the sensor unit cover is completely closed. Important: R 5 Align the “ ” marks on the sensor unit and the magnet unit so that they point directly at each other and are no more than 25. Re-evaluate the position of the sensor unit and magnet unit (page 11). [. . . ] During the “Parts” Limited Warranty period, there will be no charge for parts. You must mail-in your product prepaid during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC KXHNS101




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC KXHNS101 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.