User manual PANASONIC KX-TG6413

[. . . ] (found on the bottom of the base unit) Date of purchase Name and address of dealer Note: L In the event of problems, you should contact your equipment supplier in the first instance. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting: http://www. doc. panasonic. de Contact: Panasonic Services Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, F. R. Germany Trademarks: L Eatoni and LetterWise are trademarks of Eatoni Ergonomics, Inc. 2 TCD300FX(e). book Page 3 Monday, October 25, 2004 9:56 AM Feature highlights Feature highlights Colour display The handset's colour display allows you to customise the handset to your liking. [. . . ] 3 Select "Call Options", then press , . 1 Press $ (middle soft key). 3 Select "Display Setup", then press , . 4 Select "Auto Talk", then press , . 5 Press {e} or {v} repeatedly to select the desired contrast, then press , . Other options Changing the handset PIN (Personal Identification Number) For security, the handset PIN must be entered when changing certain settings. If you forget your PIN, consult your nearest Panasonic service centre. 6 Press {ih}. Call options Turning call bar on/off This feature prohibits making outside calls. When call bar is turned on, only intercom calls and calls to emergency numbers (page 27) can be made. 1 Press $ (middle soft key). 23 TCD300FX(e). book Page 24 Monday, October 25, 2004 9:56 AM Handset Settings 1 Press $ (middle soft key). Note: L If keytones are turned off, error tones will not sound when you enter the wrong PIN or when memory is full. 4 Select "Handset PIN", then press , . 5 Enter the current 4-digit handset PIN. 6 Enter the new 4-digit handset PIN, then press , . Resetting the handset to its default settings 1 Press $ (middle soft key). Changing the language LetterWise® 4 Select "Reset Handset", then press , . You can change which language is used for LetterWise character entry (page 36, 43). 5 Enter "0000" (default handset PIN). L If you changed the PIN, enter it (page 23). 1 Press $ (middle soft key). 3 Select "Other Options", then press , . 6 Select "Yes", then press , . 7 Press {ih}. Note: L The following items will be deleted or reset to their default settings: ­ Settings listed on page 19 ­ Redial list ­ Voice enhancer ­ Category names ­ Category ringtones ­ Category display colours L The following items will be retained: ­ Phonebook entries (category names, ringtones, and display colours will be reset to their default settings. ) ­ Date and time 4 Select "LetterWise", then press , . 5 Select the desired language, then press , . 6 Press {ih}. Turning keytones on/off Keytones are tones heard when keys are pressed. 6 Select the desired setting, then press , . 7 Select the desired setting, then press , . 7 Press {ih}. Setting pause length Change the pause length, if necessary, depending on the requirements of your service provider or PBX. 8 Press {ih}. Call options Setting dialling mode (tone/pulse) "Tone": Select when you have a touch tone service. "Pulse": Select when you have rotary or pulse service. 1 Press $ (middle soft key). 3 Enter "0000" (default base unit PIN). L If you changed the PIN, enter it (page 28). 4 Select "Call Options", then press , . 1 Press $ (middle soft key). 3 Enter "0000" (default base unit PIN). L If you changed the PIN, enter it (page 28). 5 Select "Pause Length", then press , . 6 Select the desired setting, then press , . 7 Press {ih}. Storing/changing emergency numbers These settings determine which phone numbers can be dialled while the call bar feature is on (page 23). 4 Select "Call Options", then press , 2 times. 5 Select the desired setting, then press , . 6 Press {ih}. Changing the recall time Change the recall time, if necessary, depending on the requirements of your service provider or PBX. 1 Press $ (middle soft key). 3 Enter "0000" (default base unit PIN). L If you changed the PIN, enter it (page 28). 1 Press $ (middle soft key). 3 Enter "0000" (default base unit PIN). L If you changed the PIN, enter it (page 28). 4 Select "Call Options", then press , . 5 Select "Emergency No. ", then press , . 6 Select a memory location, then press , . 27 TCD300FX(e). book Page 28 Monday, October 25, 2004 9:56 AM Base Unit Settings L If the memory location already contains an emergency number, the number is displayed. L If the memory location already contains a restricted number, the number is displayed. 7 Enter/edit the number, then press , . L To erase an emergency number, press and hold {C/T}. 9 Enter the phone number or area code to be restricted (8 digits max. ), then press , . Setting call restriction You can restrict selected handsets from dialling certain numbers. [. . . ] A busy tone is heard when {C} is pressed. Static is heard, sound cuts in and out. Interference from other electrical units. 47 TCD300FX(e). book Page 48 Monday, October 25, 2004 9:56 AM Useful Information Problem The handset stops working while being used. Cause & solution L Disconnect the AC adaptor and turn off the handset. Start again. While storing an entry in the phonebook or assigning a one touch dial, the handset starts to ring. [. . . ]