User manual PANASONIC KX-TG6421E

[. . . ] (found on the bottom of the base unit) Date of purchase Name and address of dealer Note: L This equipment is designed for use on the UK and Republic of Ireland analogue telephone network. L In the event of problems, you should contact your equipment supplier in the first instance. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting: http://www. doc. panasonic. de Contact: Panasonic Services Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, F. R. [. . . ] Setting pause length Change the pause length, if necessary, depending on the requirements of your service provider or PBX. 7 Enter/edit the number, then press {j/OK}. L To erase an emergency number, press and hold {C/T}. 8 Press {ih}. 32 Helpline Tel. 01289 8333 TCD210220E(e-e). book Page 33 Tuesday, January 18, 2005 9:44 AM Base Unit Settings Setting call restriction You can restrict selected handsets from dialling certain numbers. You can assign up to 6 phone numbers to be restricted, and select which handsets will be restricted. Storing area codes here will prevent the restricted handsets from dialling any phone number in that area code. If a restricted number is dialled, the call will not be connected and the restricted number will flash on the display. 10 Press {ih}. Other options Changing the base unit PIN (Personal Identification Number) For security, the base unit PIN must be entered when changing certain settings. If you forget your PIN, consult your nearest Panasonic service centre. 1 Press {j/OK}. 2 Select "Base Unit Setup", then press {>}. 3 Enter "0000" (default base unit PIN). L If you changed the PIN, enter it (page 33). 4 Select "Call Options", then press {>}. 1 Press {j/OK}. 2 Select "Base Unit Setup", then press {>}. 5 Select "Call Restrict", then press {>}. 3 Enter "0000" (default base unit PIN). L If you changed the PIN, enter it. 6 Set which handsets will be restricted by pressing the desired handset number. L Flashing numbers indicate call restriction is turned on for the corresponding handset. The number will stop flashing. 4 Select "Other Options", then press {>}. 5 Select "Base Unit PIN", then press {>}. 6 Enter the new 4-digit base unit PIN, then press {j/OK}. 7 Press {ih}. Changing category ringtones You can select a ringtone for each category. Ringtone", the unit will use the external ringtone you set on page 25 when calls from this category are received. Select the current setting of the category ringtone, then press {>}. Audible call for shared phonebook (KX-TCD220 only) Audible call allows you to know who is calling without looking at the display. If you record an audible call announcement for a shared phonebook entry (page 21), the Helpline Tel. 01289 8333 35 TCD210220E(e-e). book Page 36 Tuesday, January 18, 2005 9:44 AM Caller ID Service audible call recording will be announced when you receive a call from that person. Note: L If the handset ringer is turned off, audible call announcements will not be heard. To erase a number Press {j/OK}, select "Edit and Call", then press {>}. Press {<} or {>} to place the cursor on the number you wish to erase, then press {C/T}. 5 Press {C} or {s}. Caller list Viewing the caller list and calling back Phone numbers of the last 50 different callers will be logged in the caller list. When the 51st call is received, the oldest caller information will be automatically erased. You can use this list to return missed calls. Erasing caller information 1 Press {j/OK}. [. . . ] L When an error code is displayed, "Q" will not be displayed even if you have read the message. "FD" is displayed. "FE" is displayed. "E0" is displayed. "Q" is not displayed after you read a message. An error code ("FD", "FE", or "E0") is displayed. Answering system (KX-TCD220 only) Problem The other party complains that they cannot leave a message. Cause & solution L The recording time is set to "Greeting Only". [. . . ]