User manual PANASONIC PT-AE3000U

[. . . ] Operating Instructions LCD Projector Model No. PT-AE3000U Before operating this product, please read the instructions carefully and save this manual for future use. TQBJ0277-1 ENGLISH Important Safety Notice Dear Panasonic Customer: The following information should be read and understood as it provides details, which will enable you to operate the projector in a manner which is both safe to you and your environment, and conforms to legal requirements regarding the use of projectors. Before connecting, operating or adjusting this projector, please read these instructions completely and save this booklet with the projector for future reference. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector. [. . . ] Select a menu item and the I H to adjust each item level. The result box is displayed on the right of the cursor and shows the adjusted color. CURSOR RETURN SELECT ENTER DEFAULT COLOR TINT BRIGHTNESS PROFILE NORMAL CURSOR LOG PROFILE SAVE PROFILE DELETE PROFILE NAME CHANGE Adjusted color Create a new profile Adjusting the selected color Select a color and adjust COLOR, TINT and BRIGHTNESS. Select the CURSOR menu and press ENTER. The projected image is captured, and the target cursor is displayed. When the LOG is fully stored, the target cursor will not be displayed. Press ENTER to store the adjusted result. "PROCESSING" is displayed for a few seconds and the result is stored in LOG. You can store up to 8 logs under LOG for each PICTURE MODE setting. Basic Operation 5. Press MENU or RETURN to return to the previous menu. Repeat the steps above to store more adjustment. Managing stored logs You can edit or delete the stored logs of the selected PICTURE MODE. Move the cursor with F G I H to the required place to select a color and press ENTER. The color at the center of the target cursor is sampled and the sample box is displayed on the left of the cursor. You may fail to adjust when the very edge point of the projection area is selected as sample. The LOG menu is displayed. PICTURE MODE : CINEMA1 POINT1 POINT2 POINT3 POINT4 POINT5 POINT6 POINT7 POINT8 ALL DELETE CURSOR RETURN SELECT ENTER DEFAULT COLOR TINT BRIGHTNESS Sampled color Adjusted color Sampled color 2. Select the required log from 1 - 8 or ALL DELETE, and press ENTER. Select CHANGE to edit the log. When you select ALL DELETE, the "DELETE ALL LOG. " screen is displayed. The PROFILE setting will be set to NORMAL. 26 - ENGLISH Remote control operation Saving a log setting as a profile Return to the COLOR MANAGEMENT menu and save the stored log as a profile. Select the PROFILE SAVE menu and press the ENTER button. The PROFILE SAVE menu is displayed. You can save the profile as USER1, USER2 and USER3. Deleting the saved profiles You can delete the profiles from PROFILE DELETE menu. Select the required profile or ALL DELETE and press the ENTER button. The confirmation screen will be displayed and select OK. USER1 USER2 USER3 3. Press the ENTER button. Changing the profile names You can change the name of the profiles from the PROFILE NAME CHANGE menu. Rename the profile. Use F G I H to specify the location of the required character to enter and press the ENTER button. 2. Press the ENTER button to save the profile. The confirmation screen is displayed. Name the profile. Use F G I H to specify the location of the required character to enter and press the ENTER button. You can enter up to 14 characters. PROFILE NAME INPUT ALL DELETE 4. Select OK and press the ENTER button to set the entered text as a name. Loading saved profiles OK CANCEL 4. Repeat step 3 until you finish the text line. Move cursor to ALL DELETE and press the ENTER button to delete all the entered text line. [. . . ] 54 SPLIT ADJUST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 S-VIDEO IN Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 N Navigation buttons Control panel button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Remote control button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 NR (Noise Reduction) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 O OPTION menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 OSD DESIGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 OSD POSITION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 OVER SCAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 T Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]