User manual PANASONIC PT-D7600

[. . . ] To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time. This apparatus is equipped with a three prong earthingtype mains plug. [. . . ] This function is effective for the 480i/480p signal input. Operation Press . Adjustment The picture position moves to the right. The picture position moves to the left. J S1 AUTO The projector identifies the S1 signal and displays the picture by automatically switching the screen sizes between 4 : 3 and 16 : 9. This function is effective for S-VIDEO NTSC signals. Press . ENGLISH - 59 Settings The picture position moves down. POSITION menu J VID AUTO (PRI. ) The projector identifies the abovementioned VID or S1 signals and displays the picture by automatically choosing the screen sizes of 4 : 3 or 16 : 9 according to the VID if it is detected or S1 signals if a VID is not detected. This function is effective for S-Video NTSC signals. z Some size modes are not available for certain types of input signals. z If an aspect ratio which is different from the aspect ratio for the input signals is selected, the pictures will appear differently from the originals. z If using this projector in places such as cafes or hotels to display programs for a commercial purpose or for public presentation, note that adjusting the aspect ratio or using the zoom function to change the screen pictures may be an infringement of the rights of the original copyright owner for that program under copyright protection laws. z If conventional (normal) 4 : 3 pictures which are not wide-screen pictures are displayed on a wide screen, the edges of the pictures may not be visible or they may become distorted. Such pictures should be viewed as with an aspect ratio of 4 : 3 in the original format intended by the creator of the pictures. Note J THROUGH Pictures are displayed without changing the resolution of the input signals. J 16 : 9 When standard signals *4 are input, the pictures are displayed with the aspect ratio converted to 16 : 9. When wide signals are input *5, the pictures are displayed without changing the aspect ratio. J4 : 3 When standard signals *4 are input, the pictures are displayed without changing the aspect ratio. When wide signals are input *5 and [4:3] is selected with [SCREEN FORMAT], the aspect ratio is changed to 4:3. If [4:3] is not selected with [SCREEN FORMAT], the pictures are reduced so that they will be in the 4:3 screen without changing the input aspect ratio. ZOOM This adjusts the size of the projected pictures. 1 ) Press to select [ZOOM]. z The result of the keystone correction will affect the aspect ratio and the size of the image. Note ENGLISH - 63 Settings ADVANCED ADVANCED MENUMENU z See "Navigating through the menu" (Æpage 50). z See "MAIN MENU" and "SUB MENU" (Æpage 51). BLANKING Blanking adjustment fine-tunes the images projected by the video deck or other devices when the noise appears on the edges of the screen or if a part of the image lies slightly offscreen. 1 ) Press to select [BLANKING]. 2 ) Press <ENTER> button. z The [BLANKING] screen will be displayed. DIGITAL CINEMA REALITY Increase the vertical resolution when the PAL (or SECAM) 576i signal input or the NTSC 480i, 1 080/50i and 1 080/60i signal input is applied. 3 ) Press to select the desired item for adjustment. 4 ) Press to adjust blanking. z The adjustment value for the PT-DZ110XE can 1 ) Press to select [DIGITAL CINEMA REALITY]. 2 ) Press or <ENTER> button. z The [DIGITAL CINEMA REALITY] individual adjustment screen will be displayed. be changed within a range of 0 to 599 vertically and 0 to 959 horizontally. z The adjustment value for the PT-D7600 can be changed within a range of 0 to 524 vertically and 0 to 699 horizontally. z The adjustment value for the PT-DW90XE can be changed within a range of 0 to 383 vertically and 0 to 682 horizontally. When correcting the upper blanking of the screen (top) Press to move the blanking zone upward; Press to downward. When correcting the lower blanking of the screen (bottom) Press to move the blanking zone upward; Press to downward. When correcting the left hand blanking of the screen (left) Press to move the blanking zone to the right; Press to the left. When correcting the right hand blanking of the screen (right) Press to move the blanking zone to the right; Press to the left. 3 ) Press to select [DIGITAL CINEMA REALITY]. z The setting will change as follows each time is pressed. [. . . ] 30 m (98'5") (when operated directly in front of signal receptor) 134 g (4. 7 ozs. ) (including batteries) Width : 51 mm (2"), Length : 176 mm (6 15/16"), Height : 28 mm (1 3/32") For high ceiling : ET-PKD310H For low ceiling : ET-PKD310S Ceiling Mount Attachment : ET-PAD310 ET-D75LE6, ET-D75LE1, ET-D75LE2, ET-D75LE3, ET-D75LE4 ET-D75LE5, ET-D75LE8 ET-D75LE10, ET-D75LE20, ET-D75LE30 ET-D75MC1 ET-LAD310 (1 bulb), ET-LAD310W (2 bulbs) ET-ACF310 ET-SFD310 ET-PFD310 -- PT-DW90XE Projection lens Lens Motor Cover Replacement Lamp Unit Replacement filter unit Smoke Cut Filter Frame Options *1 : Measurement, measuring conditions and method of notation all comply with ISO21118 international standards. *2 : For details of video signals that can be projected using this projector, refer to "List of compatible signals" (Æpage 123). *3 : If ET-D75LE5 is installed, screen size is 70 inches - 300 inches. *5 : When using this projector at high elevations 1 400 - 2 700 m (4 593 - 8 858 ft) sea level, temperature will be 5 °C lower than this higher limit. [. . . ]