User manual PANASONIC PT-L720E

[. . . ] · To insert other matters than SD Memory Card in the SD Memory Card slot of the projector. · To use the card in a moist place such as bathroom or in a dusty place such as warehouse. Instruction on storage Be sure to put the card in the case when it is taken out from the main body. · Do not put the card in a vehicle or in a place exposed to direct sunlight where it may become hot. · Do not keep the card in a vehicle that may become hot, a place exposed to direct sunlight or other places in which the temperature is likely to increase, or a place in which corrosive gases may arise. For protection of important data · Do not turn off the power or remove the SD Memory Card when data is being read or written (or when the SD Memory Card access lamp is blinking). [. . . ] If any image in a folder has undergone edit by Explorer etc. , for example, the re-display button will reflect the result in the thumbnail viewing frame. Automatic play: This function will project the images in the folder one after another at constant time intervals in turn from the first one to the last. During automatic play, the [Automatic play] button changes into a [Pause] button. When the [Pause] button is pressed, the next image remains selected for transmission. However, if the [Stop] button is pressed, the display sequence will be refreshed to the top image in the folder. During automatic play, too, other personal computers cannot connect to the projector because the projector is monopolized. In addition, the user may make settings of image display interval and loop times (display times) by going to [Option] [Others]. Timer: Every press on the [START] button will change the function in turn as: [START] [STOP] [RESET]. [START] activates the timer, [STOP] suspends the timer, and [RESET] clears the timer to "0". The user can use this function to check the elapsed time in presentation for reference. Communication with SD ([TRANSMIT], [RECEIVE]): This function enables the user to transmit all images in the folder of the personal computer to the SD Memory Card set in the projector, or inversely, to retrieve images in the specified folder on the SD Memory Card from the personal computer. OFF: disables Web browser control. Web power supply ON: enables to turn on the lamp of the projector by Web browser control when the system is on standby. OFF: disables to turn on the lamp of the projector by Web browser control when the system is on standby. Use the POWER button of the projector or remote control to light the lamp. Web password Set a password within 16 alphanumeric characters. When the personal computer accesses the projector, the password will be queried. Using [ ], select the [Web] password, and press [ENTER], and a software keyboard will appear. 46 Use of Web browser control Settings on the personal computer 1 Right-click the [Internet Explorer] icon. This opens Properties. To], open [LAN 2 Go to [Connect the checkmark on settings], clear "All options", and click [OK]. Then the setting screen will be closed. Notes: · If Simple Connection is used, settings will be made automatically. (Internet Explorer Ver. 6. 0 or superior is needed, though) · If a proxy server is already used, set the IP address of the projector to which connection is made as an exception for not using a proxy server in [Advanced]. 3 In "Security", set the security level to the "Default level". Or otherwise, from "Custom level" enable "Active script". . Note: For Netscape, go to [Edit] [Setting] [Details] and enable JavaScript. 47 Use of Web browser control Operation of Web browser control Starting Web browser control Start the browser (Microsoft Internet Explorer is used as an example here), and enter the IP address assigned to the projector. Web browser control will be started. Note: Web browser control can also be started from Wireless Manager 3. 0. While Wireless Manager 3. 0 is running, right-click the icon shown on the task bar, select and left-click Remote Control. The Web browser control can also be started by pressing the [CTRL] + [H] buttons at the same time. Top screen Make setting so that the proxy server will not be used. (To use the proxy server, see page 47. ) Specify the IP address that has been assigned to the projector in the network setting. [. . . ] It defines the common information format and range of application for images used with digital still cameras, centering around TIFF and JPEG-format images. Version 2. 1 is the latest version of the Exif standard. PowerPoint Application software for creating presentations which is included as part of Microsoft Office. 95, 97, 2000 and 2002 versions are available, but the Image Creator 1. 0 software which is bundled with the projector is only compatible with the 97, 2000 and 2002 versions. 73 Before placing a repair order Please make sure of the following: Symptom Please check: · Is the PC card adapter inserted into the PC card slot of the PC until it reaches the end?· Is the SD card inserted into the SD card slot of the PC card adapter until it reaches the end? [. . . ]