User manual PANASONIC SDR-S15

[. . . ] Operating Instructions SD Video Camera Model No. SDR-S15 Before use, please read these instructions completely. LSQT1539 A Information for your safety WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. Do not use any other AV cables and USB connection cables except the supplied one. When you use the cable which are sold separately, please make sure to use the one whose length is less than 3 m. [. . . ] Set to [ ]. To cancel the setting [PHOTO SETUP] [DPOF SET][CANCEL ALL] When the message appears, select [YES]. Make settings from the menus. (P. 20) [PHOTO SETUP] [DPOF SET][SET] Select the still pictures to print. End formatting. Set the number of copies. · Selecting a picture a second time deselects it from locking. Do not turn the unit off or open the card/ battery door while formatting cards. If cards are formatted on a PC or other device, recording may take time and the cards may be unusable with the unit. Some SD cards require time to format. A[ ] appears on selected pictures. Number of copies (Up to 999) Set "0" to not print the picture. Up to 999 still pictures can be selected by repeating steps You cannot add the recording date to pictures for printing. Use this unit for DPOF settings. LSQT1539 58 LSQT1539 59 With other products 1 Playback on TV With other products 2 Copying to video recorders or DVD recorders Motion pictures and still pictures recorded with this unit can be viewed on TV. Connect the unit and AC adaptor (P. 14) and set the mode dial to [ Connect the unit and TV using the AV cable (supplied). VIDEO IN AUDIO IN ] or [ ]. Motion pictures recorded with this unit can be copied to TV video recorders and DVD recorders (hereinafter referred to as "recorder"). For recorders settings, see the operating instructions for the recorders. Copying pictures using the AV cable (supplied) Connect the unit and AC adaptor (P. 14) and set the mode dial to [ Connect the unit and recorder using the AV cable (supplied). VIDEO IN AUDIO IN ]. Insert the plugs as far as they will go. Change the input mode on the TV. (P. 52, 55) Insert the plugs as far as they will go. To display LCD monitor information on TV [SETUP][EXT. DISPLAY][ON] · To not display the date, time and other icons see P. 22, 26. Change the input mode on the TV and recorder. Play back motion pictures from the unit (P. 52) and start recording on the recorder. When copied motion pictures are played back on a wide-screen TV, the image may be stretched in the vertical direction. Also, see the operating instructions for the widescreen TV and set aspect ratio to 16:9 (full). Copying (dubbing) pictures using DVD recorders with SD card slot By inserting SD cards recorded on this unit into DVD recorders with an SD card slot, pictures can be copied onto hard disk drives and DVDs. If images or audio are not output, check the following: · That the plugs on the AV cable are inserted into terminal as far as they can go · That the plugs on the AV cable are connected to the correct terminals · That input settings and the selected input channel of the TV are correct If pictures are not displayed correctly on a wide-screen TV, adjust the display settings of the TV. If the image is stretched in the vertical direction on the TV using a 4:3 aspect ratio [SETUP][TV ASPECT][4:3] Insert the SD card into the SD card slot of the DVD recorder. The video format is converted when motion pictures recorded with this unit are copied onto hard disk drives or DVDs. The converted motion picture cannot be copied at high speed onto DVD-R discs. Moreover, motion pictures that are copied back onto SD cards using a computer or other device do not play back on this unit. 60 LSQT1539 LSQT1539 61 With other products 3 Printing pictures from PictBridge printers Still pictures recorded with this unit can be printed by connecting the unit directly to a printer that supports PictBridge. Connect the unit and AC adaptor (P. 14), and set the mode dial to a setting other than [OFF]. Connect the unit and printer using the USB cable (supplied). Display the PictBridge menu. Make print settings. Print settings Item Insert the plugs as far as they will go. DATE PRINT PAPER SIZE OFF/ON STANDARD: 4×5 INCH: 5×7 INCH: 4×6 INCH: A4: STANDARD: [ ]: [ ]: Available settings Prioritize printer setting. [. . . ] Do not use batteries if damaged or deformed (especially terminals) from dropping, etc. If the battery does not last long immediately after charging, it has reached the end of its service-life. Notice about the rechargeable battery · The battery is designated recyclable. Please follow your local recycling regulations. 98 LSQT1539 LSQT1539 99 Others 5 Cautions for use (cont. ) Condensation If condensation adheres to the unit, the lens may fog and the unit and SD card may not function properly. [. . . ]