User manual PANASONIC TH-65PF11UK

[. . . ] Operating Instructions Manual de instrucciones High Definition Plasma Display Alta definición Pantalla de plasma Model No. Número de modelo TH-42PF11UK TH-50PF11UK TH-58PF11UK TH-65PF11UK The illustration shown is an image. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. La ilustración mostrada es una imagen. Antes de conectar, utilizar o ajustar este producto, lea completamente este manual de instrucciones; y guárdelo para consultarlo en el futuro en caso de ser necesario. English Español TQB2AA0804 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. The lightning flash with arrow-head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons. [. . . ] (This cannot be adjusted when the input signal is Digital. ) S CURVE 2. 0 2. 2 2. 5 2. 6* * When 2k1k signals are received with the Dual Link HD-SDI Terminal Board (TYFB11DHD), GAMMA "2. 6" can also be selected. Adjusts the white balance for dark blue areas. Down Up OFF Less Less Less Less Less Less ON More More More More More More Notes: · Carry out "W/B" adjustment as follows. Adjust the white balance of the bright sections using the "W/B HIGH R" , "W/B HIGH G" and "W/B HIGH B" settings. Adjust the white balance of the dark sections using the "W/B LOW R" , "W/B LOW G" and "W/B LOW B" settings. Steps 1 and 2 affect each other's settings, so repeat each step in turn to make the adjustment. · The adjustment values are memorized separately for each input terminal. · The adjustment range values should be used as an adjustment reference. Helpful Hint ( / NORMALIZE Normalization) On the remote control unit, while the "ADVANCED SETTINGS" menu is displayed, if either the N button is pressed at any time or the ACTION ( ) button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings. 27 SOUND Adjustment 1 2 Press to display the SOUND menu. Select the desired level by listening to the sound. SOUND NORMALIZE NORMAL 1/2 AUDIO MENU BASS MID TREBLE BALANCE SURROUND AUDIO OUT (PIP) STANDARD 0 0 0 0 OFF MAIN 3 Item AUDIO MENU BASS MID TREBLE BALANCE SURROUND Press to exit from adjust mode. SUB: Selects PIP frame sound. INPUT1 PC INPUT1 PC AUDIO OUT (PIP) A B A B Musical note is displayed on right side of the audio output screen label. Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU. Helpful Hint ( / NORMALIZE Normalization) While the "SOUND" menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings. SDI SOUND OUTPUT This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board (TYFB11DHD) is installed to the unit. SDI SOUND OUTPUT LEFT CHANNEL RIGHT CHANNEL SOUND OUT LEVEL METER 2/2 CHANNEL 1 CHANNEL 1 OFF OFF Item Details CHANNEL 1 to CHANNEL 16 LEFT CHANNEL Selects left audio channel. OFF 1-8CH 9-16CH Sets audio channels to show in the audio level meter. 8 channels are displayed in the audio level meter; 4 channels each on both right and left sides of the display. 1-8CH: Displays the audio level meter (1-8ch) 9-16CH: Displays the audio level meter (9-16ch) Notes: · This menu is available only when selecting a slot that HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board (TY-FB11DHD) is installed. · This menu is unavailable when two-screen display mode is active. LEVEL METER 28 PRESENT TIME SETUP / SET UP TIMER The timer can switch the Plasma Display ON or OFF. Before attempting Timer Set, confirm the PRESENT TIME OF DAY and adjust if necessary. Then set POWER ON TIME / POWER OFF TIME. SET UP 2/2 MULTI DISPLAY SETUP MULTI PIP SETUP PORTRAIT SETUP SET UP TIMER PRESENT TIME SETUP DISPLAY ORIENTATION LANDSCAPE 1 2 Press to display the SET UP menu. Press to select SET UP TIMER or PRESENT TIME SETUP. Press to display the SET UP TIMER screen or PRESENT TIME SETUP screen. PRESENT TIME SETUP 1 Press to select DAY or PRESENT TIME OF DAY. PRESENT TIME SETUP MON 99:99 MON 99:99 PRESENT TIME OF DAY Press to set up DAY or PRESENT TIME OF DAY. SET button: Forward DAY button: Back PRESENT TIME OF DAY Notes: · Pressing " " or " " button once changes PRESENT TIME OF DAY 1 minute. · Pressing " " or " " button continuously changes PRESENT TIME OF DAY by 15 minutes. 2 Press to select SET. Notes: · SET cannot be selected unless PRESENT TIME OF DAY is set. · Unless setting the present time other than "99:99", DAY setting is invalid. · The settings of "DAY" and "PRESENT TIME OF DAY" are reset when leaving the display turned off for about 7 days for the following reasons: switch of the unit to turn off the display. [. . . ] Repaired or replacement parts supplied during the warranty coverage period carry the unexpired portion of the original warranty coverage period. The owner must produce the product purchase receipt or other satisfactory evidence of date of original purchase. This warranty does not apply to external appearance items, such as handles, knobs, safety windows, etc. This warranty does not apply to any part, or parts, of the product, installed, altered, repaired or misused in any way that, in the opinion of PCI, affects the reliability of or detracts from the performance of the product. [. . . ]