User manual PANASONIC TX-39A300E

[. . . ] If there is lightning or storms, or if the TV is not going to be used for a while (e. The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Note : Follow the on screen instructions for operating the related features. [. . . ] If you select Cable option and press OK button on the remote control a confirmation screen will be displayed. Note: Searching duration will change depending on the selected search step. 5” inch (hdd with external power supply) external hard disk drives or USB memory stick to your TV by using the USB inputs of the TV. Media Playback via USB Input First Time Installation When turned on for the first time, the language selection screen is displayed. On the next screen, set your preferences using the navigation buttons and when finished, press OK to continue. Note: Depending on the Country selection you may be asked to set and confirm a PIN at this point. You have to enter it if you are asked to enter a PIN for any menu operation later. Option Menu The Option Setup menu allows you to access some options quickly. this menu includes Power Save Mode , Picture Mode , Equalizer Settings , Favourites , Off Timer options. English - 9 - TV Menu Features and Functions Picture Menu Contents Mode Contrast Brightness Sharpness Colour Power Save Mode Backlight (Optional) Noise Reduction Dynamic Contrast Colour Temp Picture Zoom You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural. The backlight function will be inactive if the Power Save Mode is set to Eco. The backlight cannot be activated in VGA, Media Browser mode or while the picture mode is set to Game. If the broadcast signal is weak and the picture is noisy, use the Noise Reduction setting to reduce the amount of noise. Advanced Settings You can change the Dynamic Contrast ratio to desired value. Note: Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltage switching) HDMI True Black Film Mode Skin Tone Colour Shift RGB Gain Reset Autoposition (in PC mode) H Position (in PC mode) V Position (in PC mode) Dot Clock (in PC mode) Phase (in PC mode) While watching from HDMI source, this feature will be visible in the Picture Settings menu. Films are recorded at a different number of frames per second to normal television programmes. Turn this feature on when you are watching films to see the fast motion scenes clearly. You can configure the colour temperature values using the RGB Gain feature. This item shifts the image horizontally to the right hand side or left hand side of the screen. This item shifts the image vertically towards the top or bottom of the screen. Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. [. . . ] No picture • No Picture means that your TV is not receiving a transmission. To cancel mute, press the “ ” button, or increase the volume level. Remote control - does not operate • The batteries may be exhausted. Input sources - can not be selected • If you cannot select an input source, it is possible that no device is connected. [. . . ]