User manual PENTAX ZX-6
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PENTAX ZX-6. We hope that this PENTAX ZX-6 user guide will be useful to you.
Manual abstract: user guide PENTAX ZX-6
Detailed instructions for use are in the User's Guide.
[. . . ] MZ-6(E)00/cover1-4
11/8/02 11:27 AM
Page 1
OPERATING MANUAL
PENTAX Corporation 2-36-9, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www. pentax. co. jp)
PENTAX EUROPE GmbH (European Headquarters) Julius-Vosseler-Strasse, 104, 22527 Hamburg, GERMANY
(HQ - http://www. pentaxeurope. com Germany - http://www. pentax. de) Pentax House, Heron drive, Langley, Slough, Berks SL3 8PN, U. K. (http://www. pentax. co. uk) Pentax France S. A. S. 12/14, rue Jean Poulmarch, 95106 Argenteuil Cedex, FRANCE Pentax Benelux B. V. (for Netherlands) Spinveld 25, 4815 HR Breda, NETHERLANDS (http://www. pentax. nl) (for Belgium & Luxembourg) Weiveldlaan 3-5, 1930 Zaventem, BELGIUM (http://www. pentax. be) Pentax (Schweiz) AG Widenholzstrasse 1 Postfach 367 8305 Dietlikon, SWITZERLAND (http://www. pentax. ch) Pentax Scandinavia AB P. O. Box 650, 75127 Uppsala, SWEDEN (http://www. pentax. se) PENTAX U. S. A. , INC. [. . . ] Since the indication of aperture value inside the viewfinder only serves as a general reference, it may differ from the set aperture value.
69
68
MZ-6(E)04 D1/045-073
11/8/02 12:01 PM
Page 70
SELECTING AN EXPOSURE MODE
· When lenses other than an F or FA lens is used, no approximate aperture indication will appear in the viewfinder. · The indicator in the viewfinder turns to orange when the shutter speed changes to a slower shutter speed which causes camera shake. Exposure Warning If the subject is too bright or too dark, both shutter speed, aperture setting and [ ]/[ ]will blink in the viewfinder as a warning as shown. It means that the exposure is out of metering range, unable to obtain a correct exposure even if the aperture is adjusted. Select a darker subject or use a flash if it is too dark.
wWhen using this mode, use a steady tripod to prevent camera shake and attach the optional "Cable Switch CS-205" after opening the release socket cap.
Memo
NOTE
· Up to approx. 8 hours of time exposure are possible with new lithium batteries at ambient temperatures. · With the remote control shooting mode set, the shutter remains open as long as the remote control's shutter release button held down. · The indicator in the viewfinder turns to orange color.
STEP UP
ADVANCED OPERATIONS
USING THE BULB EXPOSURE MODE
This mode is useful for the long exposures required for shooting night scenes and fireworks. The shutter remains open as long as the shutter release button is held down.
qWith the Metered-Manual Mode set, move the select lever to change the shutter speed until [ Bu ] appears in the viewfinder and on the LCD panel.
ABOUT EXPOSURE COMPENSATION
The exposure compensation allows you to deliberately overexposure (brighten) or underexposure(darken) a subject, or compensate for difficult lighting conditions which may fool the camera's built-in exposure meter.
Memo
· Exposure compensation does not work in the Metered manual mode and Bulb Exposure Mode.
70
71
MZ-6(E)04 D1/045-073
11/8/02 12:01 PM
Page 72
SELECTING AN EXPOSURE MODE
1
Setting the exposure compensation amount
qWhile holding down the exposure compensation button, move the select switch to set the desired compensation value on the LCD panel.
AE LOCK FUNCTION
You can lock the exposure setting before you take the picture. If the subject is too small for a proper exposure setting to be obtained, you can zoom in on the subject to obtain a proper exposure setting. Then you can lock the exposure setting and recompose the shot before taking the picture.
STEP UP
[ ] is displayed on the LCD panel. The bar graph which indicates the compensation value and [ ] appear in the viewfinder.
1
Setting AE Lock
qPosition the area to be measured in the viewfinder metering area and press the AE Lock button [ AE-L ]. w[ ] is displayed in the viewfinder.
ADVANCED OPERATIONS
wThe exposure compensation can also be confirmed in the viewfinder. When the dot is displayed to the [ ] side, it indicates overexposure and when the dot is displayed to the [ ] side, it indicates underexposure. Moving one dot on the bar graph indicates 0. 5 step (0. 5EV).
Memo
Memo
When under or over exposure is set beyond +2 or -2 steps, [ ] or [ ] indicator will blink.
Memo
· The current exposure setting will be locked for about 20 sec. · If the shutter release button or AE Lock button is pressed while the AE Lock timer is operating, the memorized meter reading will remain even if the finger is released from the button. · When the AE lock button is depressed, the audible PCV signal is heard. · The auto pop-up built-in flash function does not work while the AE Lock is used.
· The exposure compensation range is -3EV to +3EV in 0. 5EV. · Exposure compesation does not work in the metered manual mode and Bulb exposure mode. · The exposure compensation cannot be canceled even if the power is turned OFF or any other exposure mode is set.
72 73
MZ-6(E)04 D2/074-084
11/8/02 12:04 PM
Page 74
ABOUT FOCUSING
MULTI(6)-SEGMENT METERING
This mode automatically measures light in six different zones, enabling proper exposure value in a wide variety of normal and adverse lighting conditions.
Memo
ABOUT FOCUSING
The autofocus modes, and manual focus mode are explained here.
USING AUTOFOCUS
When a lens other than an A, F or FA lens is attached, the center-weighted metering mode is automatically set .
Memo
STEP UP
CANCEL THE AUDIBLE PCV SIGNAL
You can change the audible PCV signal on or off when the self-timer, remote control, AE Lock function is in use or when the focus is in-focus.
When the autofocus function or the viewfinder's focus indicator [ ] cannot be used for focus confirmation for the following reasons, focus on the subject in the manual focus mode with the aid of the matte field in the viewfinder as you would with a non-AF SLR camera. (The subject is difficult to autofocus. ) p. 76 · The maximum aperture of the lens in use is smaller than f/5. 6. · A bellows 100mm f/4 lens, Shift 28mm f/3. 5 (shifted) lens, or Reflex lens is in use. [. . . ] This equipment has been tested and found comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PENTAX ZX-6
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PENTAX ZX-6 will begin.