User manual PHILIPS AJ7010

[. . . ] Unplug this clock radio during lightning storms or when unused for long periods of time. Servicing is required when the clock radio has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the clock radio, the clock radio has been exposed to rain or moisture, does not operate normally, or has been dropped. [. . . ] turn the screw clockwise to lock the battery compartment. Warning · To reduce the risk of fire or electric shock, do not expose this clock radio to rain or moisture. EN 7 English 3 Get started Replace battery of the main unit Set clock If the preset time is inaccurate, you can set time and date manually. 1 2 3 4 Plug and set Time has been preset at the factory. The built-in lithium battery can maintain clock setting despite power interruption. In standby mode, press SET TIME to activate clock setting mode. Repeat steps 2-3 to set the minute, 12/24 hour format, year, month, day, and monthday display mode in sequence. Tip · In time and date setting mode, if you press and hold the knob for 3 seconds, the clock radio will save the change and quit the setting mode. Select time zone You can adjust time zone setting according to your location. 1 2 In standby mode, press TIME ZONE. Press the knob to confirm. 3 For Europe: Western European Time (WET) Eastern European Time (EET) +0 Central European Time (CET) +1 (Default) +2 Moscow Standard Time (MST) +3 8 EN 4 Listen to FM/ MW radio Tune to radio stations Tip · Position the antenna as far as possible from TV, VCR, or · other radiation source. For better reception, fully extend and adjust the position of the antenna. 1 2 3 4 5 Tune to a radio station. Repeat steps 1 to 4 to store other stations. Note 1 2 3 4 5 1 2 · To remove a pre-stored station, store another station in Press FM/MW to select FM or MW tuner source. » The clock radio tunes to a station with strong reception automatically. In tuner mode, press TUNING MODE repeatedly until [STEP] (step) blinks. Rotate the knob slowly to select a frequency. its place. Select a preset radio station In tuner mode, press PRESET, then rotate the main knob to select a preset number. To tune to a station manually: Adjust volume Store radio stations automatically You can store a maximum of 20 FM radio stations and 10 MW radio stations. 1 2 In tuner mode, press TUNING MODE repeatedly until [AUTO] (auto) blinks. » The clock radio stores all the available FM/MW radio stations and broadcasts the first available station automatically. EN 9 English Store radio stations manually 5 Other features Display indoor/outdoor temperature Adjust temperature display 2 3 4 Rotate the knob until the corresponding icon appears. » The main unit and sensor begin to detect signal from Channel 2 or 3 and then display the outdoor temperature. 1 2 Press DISPLAY. Rotate the knob to select a temperature display mode for the main unit: · Display indoor temperature; · Display outdoor temperature detected from channel 1/2/3; or · Display indoor and outdoor temperature alternatively. Press the knob to confirm. Tip Enjoy nature sound This clock radio provides realistic nature sounds of rooster, forest, sea, rain, bell, and bird. 3 1 2 3 4 Press NATURE SOUND. Rotate the knob to adjust the volume level of the nature sound (0-8). Tip · To convert between Centigrade (°C) and Fahrenheit (°F) · temperature display, adjust °C/°F slide inside the battery compartment of the sensor. [. . . ] If you encounter problems when using this apparatus, check the following points before requesting service. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet. ) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. [. . . ]