User manual PHILIPS CSS2133B

[. . . ] For product support, visit Para obtener asistencia técnica, visite Pour en savoir plus sur l’assistance sur les produits, visitez le site www. hd. philips. com CSS2133B User manual Manuel d’utilisation 3 Manual del usuario 19 37 EN: For further assistance, call the customer support service in your country. • To obtain assistance in the U. S. A. , Canada, Puerto Rico, or the U. S. Virgin Islands, contact Philips Customer Care Center at 1-866-310-0744 • To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 504 6200 FR: Pour obtenir de l’aide supplementaire, communiquez avec le centre de service a la clientele de votre pays. • Pour obtenir de l’aide aux Etats-Unis, au Canada, a Puerto Rico ou aux lles Vierges americaines, communiquez avec le centre de service a la clientele Philips au : 1-866-310-0744 • Pour obtenir l’aide au Mexique, entrez en contact avec le centre de soin de client de Philips a 01 800 504 62 00 ES: Para obtener mas informacion, llame al servicio de soporte al cliente de su pais. [. . . ] • The Source indicators on the front panel blink once when the volume is set to either minimum or maximum. • The current Source indicator on the front panel blinks continuously. To restore the sound, press MUTE again or press VOL +/-. Night mode For quiet listening, decrease the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks. 1 Press and hold SURROUND for three seconds to turn night mode on or off. »» When night mode is turned on, the AUX indicator on the front panel blinks twice. EN 11 CSS2133B_F7_UM_V1. 0. indb 11 2013/2/22 17:15:21 English Choose your sound »» When night mode is turned off, the MUSIC iLINK indicator on the front panel blinks twice. MP3 player Connect your MP3 player to play your audio files or music. • A 3. 5mm stereo audio cable. 3 CSS2133B to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth). »» When the Bluetooth connection succeeds, and the Bluetooth indicator lights up. »» If the connection fails, the Bluetooth indicator blinks continually. • When your switch back to Bluetooth mode, Bluetooth connection remains active. Note Play music 4 1 2 3 Connect the MP3 player to the SoundBar as described in the Quick start guide. Press the buttons on the MP3 player to select and play audio files or music. 5 Play audio through Bluetooth Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers. What you need • A Bluetooth device which supports Bluetooth profile A2DP, and with Bluetooth version as 3. 0 + EDR. • The operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet). •• The music streaming may be interrupted by obstacles between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. •• If you want to connect your SoundBar with another Bluetooth device, press and hold Bluetooth on the remote control to disconnect the currently connected Bluetooth device. •• Philips does not guarantee 100% compatibility with all Bluetooth devices. Auto standby When playing media from a connected device, the SoundBar automatically switches to standby if: • no source button is pressed for 30 minutes, and • no audio playback is detected from a connected device. 1 2 12 Press Bluetooth on the remote control to switch the SoundBar to Bluetooth mode. On the Bluetooth device, switch on Bluetooth, search for and select Philips EN CSS2133B_F7_UM_V1. 0. indb 12 2013/2/22 17:15:21 You can reset your SoundBar to the default settings programmed at the factory. 1 Note •• Koninklijke Philips Electronics N. V. bears no responsibility for improper wall mounting that results in accident, injury or damage. •• Before wall mounting, make sure the wall can support the weight of your SoundBar. •• Before wall mount, you need not remove the two rubber feet at the bottom of the SoundBar, otherwise the rubber feet cannot be fixed back. Press BASS+, VOL-, and Treble+ within three seconds. »» When the factory settings restore is complete, the SoundBar automatically switches off and restarts. Screw length/diameter Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter. 3-4mm 4mm > 25mm For information about how to wall mount your SoundBar, see the quick start guide. EN 13 CSS2133B_F7_UM_V1. 0. indb 13 2013/2/22 17:15:21 English Apply factory settings 5 Wall mount 6 Product specifications Note •• Specifications and design are subject to change without notice. •• •• •• •• •• Speaker impedance: 4 ohm woofer, 4 ohm tweeter Speaker drivers: 25 x 120 mm (1 x 5") woofer, 38 mm (1. 5") tweeter Frequency response: 150 Hz-20 kHz Dimensions (WxHxD): 708 x 47 x 65 mm Weight: 1. 1 kg Subwoofer • • • • • • Impedance: 8 ohm Speaker drivers: 130 mm (5. 25") woofer Frequency response: 20 Hz-150 Hz Dimensions (WxHxD): 165 x 240 x 295 mm Weight: 2. 6 kg Cable length: 3 m Amplifier • FTC total output power: 34W • Left + Right: 16W (1%THD, 4ohm, 300Hz-20kHz) • Subwoofer: 18W (1%THD, 8ohm, 40Hz-70Hz) RMS total output power: 60W (+/- 0. 5 dB, 30% THD) Frequency response: 20 Hz-20 kHz / ±3 dB Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) Input sensitivity: • AUX: 600 mV • Music iLink: 250 mV Remote control batteries • 1 x CR2025 • • • • Audio • S/PDIF Digital audio input: • Coaxial: IEC 60958-3 • Optical: TOSLINK Bluetooth •• •• Bluetooth profiles: A2DP Bluetooth version: 3. 0 + EDR Main unit •• •• •• Power supply: 110-127 V~, 60 Hz Power consumption: 20 W Standby power consumption: ≤ 0. 5 W 14 EN CSS2133B_F7_UM_V1. 0. indb 14 2013/2/22 17:15:21 Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www. philips. com/support. Sound No sound from SoundBar speakers. [. . . ] Replacement product can only be sent if all warranty requirements are met. WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS: This Limited Warranty applies only to the new products that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any non-Philips hardware product or any software, even if packaged or sold with the product. Non-Philips manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product. [. . . ]