User manual PHILIPS FC9153/01

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS FC9153/01. We hope that this PHILIPS FC9153/01 user guide will be useful to you.


PHILIPS FC9153/01 : Download the complete user guide (2227 Ko)

Manual abstract: user guide PHILIPS FC9153/01

Detailed instructions for use are in the User's Guide.

[. . . ] -- Do not point the hose, the tube or any other accessory at the eyes or ears nor put it in your mouth when it is connected to the vacuum cleaner and the vacuum cleaner is switched on. Caution -- When you use the vacuum cleaner to vacuum ashes, fine sand, lime, cement dust and similar substances,  the pores of the dustbag become clogged. as a result , the dustbag-full indicator will indicate that the dustbag is full. Replace the dustbag, even if it is not full yet (see chapter ‘Replacing the dustbag’). [. . . ] -- Use the crevice tool to clean narrow corners or hard-to-reach places. Accessory holder 1 Snap the accessory holder onto the handgrip (Fig. 2 Snap two accessories into the accessory holder: -- Crevice tool and small nozzle (Fig. Note:The small nozzle must be placed in the accessory holder as shown in the picture. Using the appliance 1 Pull the cord out of the appliance and put the mains plug in the wall socket. 2 Press the on/off button on top of the appliance with your foot to switch on the appliance (Fig. Adjusting suction power During vacuuming, you can adjust the suction power. -- Use maximum suction power to vacuum very dirty carpets and hard floors. -- Use minimum suction power to vacuum curtains , table carpets , etc. Suction power knob -- During vacuum cleaning, you can adjust the suction power with the suction power knob on top of the appliance (Fig. €18) Pausing during use 1 If you want to pause for a moment, insert the ridge on the nozzle into the parking slot to park the tube in a convenient position (Fig. Storage 1 Slide the tube parts into each other to reduce the tube to its shortest length. 2 Switch off the appliance and remove the mains plug from the wall socket. English 4 To store the appliance in upright position, insert the ridge on the nozzle into the storage slot (Fig. 9 5 Always put the TriActive nozzle in the carpet setting when you store it (brush strip retracted into the nozzle). Replacing the dustbag Always unplug the appliance before you replace the dustbag. Note: In some cases, the dustbag-full indicator can indicate that the dustbag is full, even though it is not. When you have vacuumed ashes, fine sand, lime, cement dust and similar substances) or if something blocks the nozzle, tube and/or hose. If the pores of the dustbag are clogged, you have to replace the dustbag, even if it is not full yet. If the dustbag is not clogged but not full either, something blocks the nozzle, tube and/or hose. Replacing the dustbag -- Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i. Make sure you hold the holder with the dustbag in horizontal position when you lift it out of the appliance. [. . . ] To remove the obstruction, disconnect the blocked-up item and connect it (as far as possible) the other way around. Switch on the vacuum cleaner to force the air through the blocked-up item in opposite direction. The lower the air humidity in the rooms, the more static electricity the appliance builds up. Elektromagnetiske felt (EMF) Dette Philips-apparatet overholder alle standarder som gjelder for elektromagnetiske felt (EMF). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS FC9153/01




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS FC9153/01 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.