User manual PHILIPS GC-7430

[. . . ] Do not use the appliance if the plug, the mains cord, the supply hose or the appliance itself shows visible damage, or if the appliance has been dropped or leaks. If the mains cord or the supply hose is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. Never leave the appliance unattended when it is connected to the mains. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. [. . . ] GC7430: Fill the water tank when the `water tank empty' light flashes. gC7420: Fill the water tank when the water in the water tank has reached the MIN level. If the tap water in your area is very hard, we advise you to mix it with an equal amount of distilled water. Using the appliance Note: Some smoke and particles may come out of the iron when you use it for the first time. note:When you switch on the appliance , the steam tank produces a pumping sound. This sound is normal and indicates that water is being pumped into the steam tank. Note: Make sure that the steam lock is released when you fill or refill the water tank. Steam ironing is only possible at higher ironing temperatures (temperature settings 2 to MaX). 5) Note: steam ironing is only possible at higher ironing temperatures (temperature settings 2 to MaX). This sound is normal and indicates that water is being pumped into the steam tank. , The power-on light on the steam tank and the iron temperature light go on to indicate that the steam tank and the iron start to heat up. 2 minutes, the steam setting light stays on continuously, to indicate that the water in the steam tank is hot enough for steam ironing. Note: During ironing, the temperature light goes on from time to time. 8) If you want to use the steam function continuously, slide the steam lock to the locking position. Ironing without steam (GC7430 only) Do not press the steam activator while you iron. , If the steam tank is empty or has not heated up yet, you hear a clicking sound inside the tank. This sound is caused by the opening of the steam valve and is perfectly harmless. 3 Put the iron on the iron platform and let the appliance cool down before you start to clean it. 1 To steam iron hanging curtains and clothes (jackets, suits, coats), hold the iron in vertical position (Fig. During steam ironing, you can use the steam boost function to remove stubborn creases. [. . . ] 1 Remove the mains plug from the wall socket and let the appliance cool down. Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. Guarantee and service If you need information or if you have a problem, please visit the Philips website at www. Com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). [. . . ]