User manual PHILIPS GC 9231

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS GC 9231. We hope that this PHILIPS GC 9231 user guide will be useful to you.


PHILIPS GC 9231 : Download the complete user guide (4467 Ko)

You may also download the following manuals related to this product:

   PHILIPS GC 9231 (3708 ko)
   PHILIPS GC 9231 (4578 ko)
   PHILIPS GC 9231 (4547 ko)
   PHILIPS GC 9231 (3708 ko)
   PHILIPS GC 9231 (4578 ko)
   PHILIPS GC 9231 (3708 ko)
   PHILIPS GC 9231 (3708 ko)
   PHILIPS GC 9231 (3708 ko)
   PHILIPS GC 9231 (4547 ko)
   PHILIPS GC 9231 (4578 ko)
   PHILIPS GC 9231 (3708 ko)
   PHILIPS GC 9231 (3708 ko)
   PHILIPS GC 9231 (3708 ko)
   PHILIPS GC 9231 (4578 ko)
   PHILIPS GC 9231 (3708 ko)
   PHILIPS GC 9231 (3708 ko)
   PHILIPS GC 9231 (3708 ko)

Manual abstract: user guide PHILIPS GC 9231

Detailed instructions for use are in the User's Guide.

[. . . ] This steam generator is equipped with OptimalTemp technology, which enables you to iron all types of ironable fabrics without adjusting the iron temperature or steam setting. -- Fabrics with these symbols are ironable,  for example linen, cotton, polyester, silk, wool, viscose and rayon. 2 Make sure that there is enough water in the water tank (see section ‘Filling the detachable water tank’). 3 Put the mains plug in an earthed wall socket and press the on/off button to switch on the steam generator. [. . . ] 1 To activate the ECO mode, press and hold the on/off button for 2 seconds. 2 To switch back to the ‘OptimalTemp’ setting, switch the steam generator off and on again. Safety Auto-off (specific types only) The Safety Auto-off function automatically switches off the appliance if it has not been used for 10 minutes, to save energy. IMPORTANT - Cleaning and maintenance IMPORTANT - Descaling the steam generator To ensure a long life for your steam generator, it is very important that you perform the descaling procedure when the EASY DE-CALC light starts to flash. One month or 10 ironing sessions to indicate that the steam generator needs to be descaled. 9 1 Press the on/off button to switch off the steam generator and remove the plug from the wall socket. 2 Place the steam generator on a stable table with the EASY DE-CALC knob sticking out beyond the edge of the table or take the steam generator to a sink. Turn the EASY DE-CALC knob anti-clockwise and let the water with scale particles flow into the cup. When no more water comes out of the steam generator, reinsert the EASY DE-CALC knob. Turn the knob clockwise to fasten it and put the plug back into the socket again. 10 English Cleaning the soleplate Clean the soleplate regularly to remove stains from the soleplate. -- To maintain a good gliding of your soleplate, it is recommended to clean it regularly (once every 2 months). You can do that by heating up the iron and moving the soleplate over a moist cloth. -- Descaling the soleplate: if you do not descale your steam generator regularly, scale may build up on the soleplate. You can remove scale by following the instructions below: 1 Descale the steam generator before you clean the soleplate (see section ‘IMPORTANT - Descaling the steam generator’). 2 Tilt the steam generator and pour 500ml distilled water into the opening. Reinsert the EASY DE-CALC knob and turn the knob clockwise to fasten it. While pressing the steam trigger, slowly move the iron back and forth across the cloth until no water comes out anymore or when steam comes out. Reinsert the EASY DE-CALC knob and turn the knob clockwise to fasten it. Specific types only: push the carry lock to lock the iron onto the platform. 5 Specific types only:You can carry the appliance with one hand by the handle of the iron. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. [. . . ] The shine or imprint is not permanent and will come off if you wash the garment. Avoid ironing over seams or folds or you can place a cotton cloth over the area to be ironed to avoid imprints. Impurities or chemicals present in the water have deposited in the steam vents and/or on the soleplate. Too much scale and minerals have accumulated inside the steam generator. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS GC 9231




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS GC 9231 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.