User manual PHILIPS HR2020

[. . . ] Caution Always unplug the appliance before you assemble, disassemble or make adjustments to any of the parts. Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. Blender Warning Never reach into the blender jar with your fingers or an object while the appliance is running. Make sure the blade unit is securely fastened to the blender jar before you assemble the blender jar onto the motor unit. [. . . ] The blender jar can be mounted in two positions: with the handle on the right side or on the left side. 2 Put the lid on the jar and turn it until it is firmly fixed (`click'). After processing, press the pulse/off button to switch off the blender. If you want to process ingredients very briefly, use the pulse/off button instead of the speed buttons. Tips If you want to crush ice cubes, put not more than 6 ice cubes (of approx. 25x35x25mm) in the blender jar and press the pulse button a few times. Cut meat or other solid ingredients into smaller pieces before you put them in the blender jar. Do not process a large quantity of solid ingredients at the same time. To get good results, we advise you to process these ingredients in a series of small batches. To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in the lid onto the rotating blades. Disassembling the blender 1 Remove the mains plug from the wall socket. Turn the blender jar with the blade unit attached anticlockwise to remove it from the motor unit. 4 Clean all removable parts immediately after use (see chapter `Cleaning'). Filter (HR2027/HR2024 only) With the filter you can make delicious fresh fruit juices, cocktails or soy milk. Do not put more than 70g of soy beans (unsoaked weight) or 150g of fruit in the filter at the same time. Preparing the filter for use 1 Mount the blender jar with the blade unit attached on the motor unit. The blender jar can be mounted in two positions: with the handle on the right side or on the left side. Make sure that the grooves of the filter fit exactly onto the ribs inside the blender jar. 6 Switch off the appliance and remove the blender jar with the blade unit attached from the motor unit. ) Tip: For optimal results, put the jar with the remaining ingredients back onto the appliance and let it run for a few more seconds. Note:When you process a large quantity, we advise you not to put all the ingredients in the filter at the same time. Start to process a small quantity and let the appliance run for a few seconds. [. . . ] Menyiapkan saringan untuk penggunaan 1 Dudukkan tabung blender pada unit pisau terpasang pada unit motor. 6 Matikan alat dan lepas tabung blender berserta unit pisau yang terpasang dari unit motor. Jangan sekali-kali meletakkan unit mata pisau pada unit motor jika balang pengisar atau bikar pengisar (jenis-jenis tertentu sahaja) tidak atau tidak dipasang dengan betul padanya. Jangan sekali-kali terlupa untuk memasukkan gelang kedap ke dalam unit mata pisau sebelum anda memasang unit mata pisau pada balang pengisar, kerana jika tidak bocor akan berlaku. [. . . ]