User manual PHILIPS HR 2024

[. . . ] Caution Always unplug the appliance before you assemble, disassemble or make adjustments to any of the parts. Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. Blender Warning Never reach into the blender jar with your fingers or an object while the appliance is running. Make sure the blade unit is securely fastened to the blender jar before you assemble the blender jar onto the motor unit. [. . . ] 1) Measuring cup Lid of blender jar Blender jar Level indication Sealing ring Blade unit Motor unit Control panel - Speed buttons (1 and 2) - Pulse/off button I Filter (HR2027/HR2024 only) J Mill beaker (HR2027/HR2021 only) Before first use Thoroughly clean the parts that come into contact with food before you use the appliance for the first time (see chapter `Cleaning'). Using the appliance You can adjust the length of the cord by winding part of it round the reel in the base. You can also use it to process vegetables, fruit, meat, pancake batter etc. Preparing the blender for use 1 Assemble the sealing ring on the blender blade unit (Fig. 3) 3 Put the blender jar with the blade unit attached on the motor unit and fix it by turning it clockwise (`click'). 4) The blender jar can be mounted in two positions: with the handle on the right side or on the left side. 2 Put the lid on the jar and turn it until it is firmly fixed (`click'). After processing, press the pulse/off button to switch off the blender. If you want to process ingredients very briefly, use the pulse/off button instead of the speed buttons. Tips If you want to crush ice cubes, put not more than 6 ice cubes (of approx. 25x35x25mm) in the blender jar and press the pulse button a few times. Cut meat or other solid ingredients into smaller pieces before you put them in the blender jar. Do not process a large quantity of solid ingredients at the same time. To get good results, we advise you to process these ingredients in a series of small batches. To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in the lid onto the rotating blades. Disassembling the blender 1 Remove the mains plug from the wall socket. 3 Turn the blender jar with the blade unit attached anticlockwise to remove it from the motor unit. 4 Clean all removable parts immediately after use (see chapter `Cleaning'). Filter (HR2027/HR2024 only) With the filter you can make delicious fresh fruit juices, cocktails or soy milk. Do not put more than 70g of soy beans (unsoaked weight) or 150g of fruit in the filter at the same time. Preparing the filter for use 1 Mount the blender jar with the blade unit attached on the motor unit. The blender jar can be mounted in two positions: with the handle on the right side or on the left side. [. . . ] Com or contact the Philips Customer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, go to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV. Recipes soy milk Note:This recipe can only be prepared with the filter (HR2027/HR2024 only). Always let the appliance cool down to room temperature between processing cycles. [. . . ]