User manual PHILIPS SDV5122T

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS SDV5122T. We hope that this PHILIPS SDV5122T user guide will be useful to you.


PHILIPS SDV5122T : Download the complete user guide (680 Ko)

You may also download the following manuals related to this product:

   PHILIPS SDV5122T (685 ko)
   PHILIPS SDV5122T (685 ko)

Manual abstract: user guide PHILIPS SDV5122T

Detailed instructions for use are in the User's Guide.

[. . . ] Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable. No naked flame sources, such as lighted candles, should be placed on the product. Warning · To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus. Caution · To prevent electric shock, fully insert the plug. [. . . ] To fully benefit from the support that Philips offers, register your product at www. philips. com/welcome. Overview 1 2 3 4 5 6 100-240V AC 6V DC power adapter (included) VHF antenna UHF antenna 6V DC connection Signal output (for TV connection) Antenna stand 6 EN To ensure the antenna to work properly, read the user manual of your television before you start. Set the television so that it receives the signal from an ANTENNA instead of CABLE or SATELLITE. Installation Determine the signal strength Before Installation, determine the best location for optimum reception. It is important for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter. Note · Choose a location near a window which gives the antenna a clear view of the transmitter. Note · Ensure the antenna element is properly mounted into the base and positioned on a horizontal surface. Note · Place the antenna away from the metal surface to avoid interference. Connect to the TV 1 Connect one end of the coaxial cable to the signal output of the antenna and the other end to the input on your TV receiver. EN 7 English 3 Get started 2 Connect the DC plug to the antenna and power supply to the 100-240V AC outlet. 4 Set up SDV5122T For VHF reception 1 Extend the VHF rod antenna to the longest possible length. 2 Note Turn the TV to the desired channel/ station. Move the VHF rod antenna in different directions until the reception is achieved. · To check the distance from the local TV broadcast transmitters to your location, visit www. antennaweb. org for more information. Set up a digital tuner with this antenna You can install available channels with the digital TV tuner. Ensure the antenna has set up properly before the tuner can receive viewable channels. There are two ways to connect the antenna to the TV: For UHF reception 1 2 Turn the TV to the desired channel/ station. Position the UHF antenna horizontally or vertically. · Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically . Ensure the signal strength is good enough before you install the channels with the tuner. · 8 EN 5 Frequently asked questions Can this antenna receive digital or work with ATSC broadcasts? [. . . ] The high definition television standards defined by the ATSC produce wide screen 16:9 images up to 1920x1080 pixels in size -- more than six times the display resolution of the earlier standard. However, many different image sizes are also supported, so that up to six standard-definition "virtual channels" can be broadcast on a single 6 MHz TV channel. (DTV) signals are used, requiring less bandwidth due to digital video compression. U UHF (Ultra high frequency) In radio or TV broadcasting: it is the frequency range of electromagnetic waves which lies between 300 MHz and 3 GHz (3000 MHz). V VHF (Very high frequency) In radio or TV broadcasting: it is the frequency range of electromagnetic waves which lies between 30 MHz and 300 MHz. C Coaxial A single copper conductor, surrounded with a layer of insulation, covered by a surrounding copper shield and finally, an insulating jacket. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS SDV5122T




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS SDV5122T will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.