User manual PHILIPS SHC5100

[. . . ] Register your product and get support at www. philips. com/welcome Indoor wireless headphones SHC5100 EN User manual A a b B c d e C D E F G H CHANNEL 1 2 CHANNEL 1 2 CHANNEL 1 2 CHANNEL 1 2 1 What's in the box 2 Get started 3 Product version table 4 5 6 EN 3 English Contents 1 What's in the box 1) Headphone 3) AC/DC adaptor 2) Transmitter 4) Antenna tube 5) 2 x AAA rechargeable shortened sleeve NiMH batteries (SBC HB550L) 4 EN Note · Before using the headphones for the first time, charge the supplied · Only use Philips rechargeable shortened sleeve NiMH batteries with your headphones. [. . . ] · If the volume of the audio source is insufficient, the transmitter automatically turns off. batteries for at least 10 hours. 1 2 3 Install/Replace supplied batteries (Fig. » Red LED blinks if no audio source is connected for two minutes. » Red LED is off if no audio source is connected for four minutes. To charge the headphones, connect the charging cable with the headphones (Fig. » Transmitter: green LED is on during charge and is off when headphones are fully charged. [. . . ] H). EN 5 English 2 Get started 3 Product version table VerAdaptor type Input Output Carrier / sion / number voltage / voltage Reception Region frequency frequency Channel 1 Channel 2 /10 SVV-005100-240V 8V 863. 5MHz 864. 5MHz Europe 080-020-A2 / 50/60Hz 200mA /05 UK SBH-005100-240V 8V 863. 5MHz 864. 5MHz 080-020-A2 / 50/60Hz 200mA For further product support, please visit www. philips. com/welcome 6 EN © 2010 Koninklijke Philips Electronics N. V. [. . . ]