User manual PHILIPS TSU3000

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS TSU3000. We hope that this PHILIPS TSU3000 user guide will be useful to you.


PHILIPS TSU3000 : Download the complete user guide (1054 Ko)

You may also download the following manuals related to this product:

   PHILIPS TSU3000 (1843 ko)

Manual abstract: user guide PHILIPS TSU3000

Detailed instructions for use are in the User's Guide.

[. . . ] TSU 3000 Safety & Regulations FCC Compliancy This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rule. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] You can select Cursor Navigation-On to navigate the Pronto NG with the cursor. User Guide 32 Customizing Pronto NG Setting the Animation Mode Pronto NG provides navigation feedback through graphical animations. Switching pages is done with a page transition, switching from Use Mode to one of the Tools is accompanied with a mode transition. You can enable and disable the animations of your Pronto NG in the second Settings Page: You can disable the animations by choosing `None' (no animations). By disabling all animations you use the absolute maximum of your Pronto NG's processing speed. When changing pages with the `Page Only' animation, one page seems to slide out of the screen, while the second page slides in. The `Mode Only' animation shifts the Pronto NG icon at the top area of the touch screen. With the option `Full' you can enable both animations at the same time. Calibrating the Touch Screen When you first use your Pronto NG, the touch screen is already calibrated. However, if you notice that your Pronto NG does not send out the commands in accordance with what is indicated on the touch screen, it is advised to recalibrate the touch screen. Attention Never use an actual pen, pencil or other sharp object on the touch screen. Use a pointy object like a plastic-tipped pen or a stylus intended for use with touch screens. 1 Tap in the second Settings Page. The second Settings Page appears again without calibrating the touch screen. Note If the calibration fails, an message appears and you can follow the procedure to calibrate the touch screen again. User Guide 33 Using the Power Features Creating and Editing Macros A macro allows you to send a sequence of commands when tapping one single button. You can for instance switch on your TV, turn on a movie channel and prepare your VCR for recording by rewinding the videotape. The action list can be created and edited in the Macro Tool. Note Once you have programmed a macro, the button actions will not be changed when you select another brand in the Brand Tool. In the Macro Tool you first have to select the button, that will contain the macro, also called the target button. Then, one by one, you create an action list by adding actions to this target button. You can do this by: Selecting another button and adding its actions to the action list of your target button. After creating the macro, all actions you added to the action list are executed when you tap the button. Creating a Macro 1 Tap and hold the Pronto NG icon in the upper left corner of the touch screen for 3 seconds. 4 Navigate to the Device and the Page that contains the target button you want to use for a macro. If you can use the button to program a macro, the `Macro' screen appears. -orIf you cannot use the button to program a macro, you hear a Failure beep. User Guide 34 Using the Power Features Note You can assign a macro to most buttons of your Pronto NG. The hard buttons on the left side of Pronto NG (Backlight, Page Up and Page Down) are fixed. The Toggle and Home button (around the cursor) can only be reprogrammed with ProntoEdit NG. Please refer to `ProntoEdit NG' on page 49. To add an action to the action list 1 Tap in the `Macro' screen. 2 Navigate to the Device and the Page that contains the button you want to add to the macro. [. . . ] A link, also called a button alias, is a shortcut from the action list of one button to the action list of another button. Instead of adding the same actions to several buttons or hard buttons, you can create a link and reuse the action list. When your Pronto NG is executing an action list and comes across a link, the action list referred to by that link is executed. A macro is a sequence of actions executed when pressing a single button on Pronto NG. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS TSU3000




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS TSU3000 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.