User manual PLANTRONICS CS50-USB

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PLANTRONICS CS50-USB. We hope that this PLANTRONICS CS50-USB user guide will be useful to you.


PLANTRONICS CS50-USB : Download the complete user guide (488 Ko)

You may also download the following manuals related to this product:

   PLANTRONICS CS50-USB (1826 ko)
   PLANTRONICS CS50-USB (1822 ko)
   PLANTRONICS CS50-USB (1878 ko)
   PLANTRONICS CS50-USB (1854 ko)
   PLANTRONICS CS50-USB (2465 ko)
   PLANTRONICS CS50-USB (2762 ko)
   PLANTRONICS CS50-USB (2083 ko)
   PLANTRONICS CS50-USB (2538 ko)
   PLANTRONICS CS50-USB (1863 ko)
   PLANTRONICS CS50-USB (1821 ko)

Manual abstract: user guide PLANTRONICS CS50-USB

Detailed instructions for use are in the User's Guide.

[. . . ] If the CD does not autoplay, then use Windows Explorer to find the file called install. bat, doubleclick on it and then follow the instructions on-screen. CHARGE YOUR HEADSET BATTERY To charge the headset To charge the headset charging the CHARGE charged, the CHARGE battery, place the headset into the DOCKING CRADLE. When the headset is fully indicator (13) will extinguish. The headset must be charged for a minimum of 1 hour prior to use ­ 3 hours to fully charge. CHOOSE YOUR HEADSET WEARING STYLE The CS50-USB/CS60-USB is provided with a choice of wearing styles. 3 on pages 2 and 3 for instructions on how to connect and adjust your choice of wearing style. INITIAL SET-UP RINGER The CS50-USB/CS60-USB includes a ringer in the base to ensure that if you are not wearing the headset then you can still receive notification of an incoming call. The feature is disabled when the Ringer switch (16) is in the up position (as shown) or enabled when the switch is in the down position. COMPUTER AUDIO & VOICE DEVICES When the CS50-USB/CS60-USB is installed, it will set itself as the default voice device in your computer. [. . . ] You can then dial in the normal way. Tip: By returning to standby mode after completing your call, you will conserve the headset battery power and extend the remaining available talktime. You can achieve this by pressing the Talk Button (3) for more than 2 seconds immediately on conclusion of the call. RECEIVING A CALL USING YOUR HEADSET If the headset is in the charging cradle when the softphone rings, remove the headset to answer the call. To end the call, replace the headset in the charging cradle or press the Talk button (3). If the headset is not in the charging cradle when the softphone rings, press the Talk button (3) to answer the call. To end the call, replace the headset in the charging cradle or press the Talk button (3). Tip: By returning to standby mode after completing your call, you will conserve the headset battery power and extend the remaining available talktime. You can achieve this by pressing the Talk Button (3) immediately on conclusion of the call. SWITCHING BETWEEN CALLS USING THE HEADSET Some softphones support a feature known as `flash'. This allows you to place the current call on or off hold, or to toggle between different calls. You can access the flash feature by pressing and holding the Volume up/down (4) on the headset for greater than 2 seconds. 12 If you have an active call on a softphone that supports flash, and wish to place it on hold, press flash. If you are using a laptop that regularly goes into standby or hibernation, the AC power supply is available to ensure the headset can be continuously charged Use the audio settings on the computer or CS50-USB/CS60-USB is the softphone to ensure that the device used for voice. Headset has a flat battery CS50/CS60-USB not set as the voice device PROBLEM I plugged everything in but the lights won't come on. Possible Cause Computer not turned on Insufficient power from USB port Solution Check that the computer is turned on and not in standby or hibernation mode. If using a USB hub, check that the AC power supply is correctly connected and that the hub can supply 250mA to charge the headset. PROBLEM I cannot hear caller / dial tone. Possible Cause Too far away from base Listen volume too quiet Solution Ensure you are within range of the base Adjust the Listen Volume Control on the headset, softphone and PC audio control. Ensure the headset speaker is positioned 14 snugly over your ear Incorrect softphone model selected Headset has flat battery Ensure you have selected the correct soft phone model through the software Recharge the battery by placing the headset in the Headset Docking Cradle. PROBLEM Callers cannot hear me. Possible Cause Mute is selected Headset microphone boom aligned incorrectly Speak volume is too low Solution Press the mute button once. Align the headset boom with your mouth Increase the speak volume on your soft phone until you can be heard by callers. If the volume is still too low, increase the microphone level on your computer. PROBLEM Receive sounds distorted. Possible Cause Listen volume too high Solution Lower the receive volume on your softphone until the distortion disappears. If the distortion is still present, lower the listen volume control on the computer. PROBLEM I can hear too much background conversation, noise or sidetone. Possible Cause Speak volume is too high Solution Lower the speak volume on your softphone until the noise or sidetone disappears. If the noise or sidetone is still present, lower the microphone volume control on the computer. 15 PROBLEM Sudden loss of audio, continuous noise or distorted audio on receive. Possible Cause Software reset required Solution Unplug and re-connect the USB connector and optional power supply Remove and re-install the battery pack (see Fig. 5 on page 4). PROBLEM The headset I was using to listen to music does not work any more Possible Cause CS50-USB/CS60-USB is set as the default audio device Solution Use the audio settings on the computer or on the softphone to ensure that CS50USB/CS60-USB is the device used for voice. Either the computer soundcard or the head set you previously used for music should be set as the audio device PROBLEM Battery talktime performance is significantly degraded even after a full recharge. [. . . ] The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five. RADIO EQUIPMENT The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. "Privacy of communications may not be ensured when using this telephone". [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PLANTRONICS CS50-USB




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PLANTRONICS CS50-USB will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.