User manual POLTI VAPORETTO 950

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual POLTI VAPORETTO 950. We hope that this POLTI VAPORETTO 950 user guide will be useful to you.


POLTI VAPORETTO 950 : Download the complete user guide (194 Ko)

You may also download the following manuals related to this product:

   POLTI VAPORETTO 950 (200 ko)
   POLTI VAPORETTO 950 (211 ko)
   POLTI VAPORETTO 950 (199 ko)
   POLTI VAPORETTO 950 (198 ko)
   POLTI VAPORETTO 950 MISE EN ROUTE DE L'APPREIL (197 ko)

Manual abstract: user guide POLTI VAPORETTO 950

Detailed instructions for use are in the User's Guide.

[. . . ] · Do not pull the power cord out of the socket, but grasp the plug itself to avoid damage to the socket. · Do not allow the power cord to be twisted, crushed, stretched, or come into contact with sharp or hot surfaces. · Do not use the appliance if the power cable or other important parts are damaged. · Do not use electric extension leads that are not authorized by the manufacturer, as they may cause damage or fire. · If it is necessary to replace the power supply cable, please refer to the nearest Polti authorised service centre, since the use of a special tool is necessary. [. . . ] Your Vaporetto may contain some residual water in the boiler from the factory testing. Unscrew the safety cap (A) (fig. 1) and fill the boiler with 1, 3 l of water using the jug (10) and the funnel (9) provided (fig. 2). 2a. Wait until the pressure indicator light (C) comes on (about 10 minutes). 3a. The steam pistol (2) has a safety lock (3) to prevent accidental production of steam by children or people unfamiliar with the appliance. To prevent accidental steam production, move the safety lock button ATTENTION: Danger of burns! · When refilling the boiler, use HOT rather than cold water, pour in gently at first and keep your face away. Otherwise the still hot boiler walls can spit drops of very hot water or steam spray. · Do not put any detergent or chemical substance in the boiler. · Make sure the patented safety cap is fully and correctly screwed on, otherwise you may experience very hot steam escaping from around the cap. · Do not empty the appliance when the water in the boiler is still hot. (3) back. When you wish to resume steam production, move the safety lock button (3) in the opposite direction and press the steam button (4) (fig. The first time you use the appliance it may leak a few drops of water due to incomplete temperature stabilisation in the hose. We therefore suggest that you initially direct the jet of steam onto a cloth, until the jet of steam appears uniform. NOTE: the pressure indicator (C) will go on and off while the appliance is in use. This indicates that the electrical resistance is operating to maintain constant pressure and should therefore be considered normal. CAUTION: if you press the steam button (4) when the appliance is still under pressure, even if the appliance is turned off and unplugged, steam may be released through the hose. So when you turn off the appliance, press (4) until no more steam comes out of the appliance before putting the appliance away. CONNECTION OF ACCESSORIES · To connect the extension tubes (7) to the handle, screw the extension tube with the ring onto the handle (fig. · When the extension tube is connected to the handle you can connect the other tube (7), the reducer (5) and the big brush (8) to it as shown in fig. 5. · To release the accessory, hold the button (11) down and separate out the components. · Check that accessories are tightly attached before using them. · The lance (6) and small nozzle (12) tools may be connected directly to the handle as shown in fig. 6, or connected with extension tubes by first connecting up the reducer (5) to the extension tube. When the reducer has been attached, you can connect the desired accessory and lock it in place by turning it in the direction of the arrow appearing on it (fig. 6). [. . . ] Perfect for cleaning radiators, door and window frames, bathroom fixtures and shutters, the lance is a very useful, irreplaceable accessory. The following tools may be connected with the lance: 6A ­ Curved nozzle for lance: for reaching particularly hard to reach corners with its curved shape. 6B ­ Round nylon brush and 6C ­ Round brass brush: for removing deposits from very narrow surfaces such as stove elements, roller blinds, gaps between tiles, bathroom fixtures, etc. To connect accessories 6A-6B-6C to the lance (6), simply connect the accessories to the tip of the lance and press gently (fig. 9). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE POLTI VAPORETTO 950




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual POLTI VAPORETTO 950 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.