User manual PROGRESS XV40

[. . . ] Please ask your local authority about your local recycling centre. Safety instructions ; This appliance complies with the following EC directives: ­ 73/23/EC dated 21. · Only connect the appliance to ­ 220/230 Volt ­ alternating current. · The mains circuit for the socket used must be protected with a fuse with a rating of at least 10 A. · Never remove the mains plug from the socket by pulling on the cable. · Do not use the appliance if: ­ the cable is damaged. [. . . ] · Avoid running over the mains lead with the appliance or the vacuum brush. · The cover cannot be closed unless a paper filter has been inserted. · Always ensure that a paper filter as well as a MICROFILTER and a HEPA filter are inserted. · Toner dust from laser printers and copiers must not be vacuumed using normal household vacuum cleaners. · This is a domestic vacuum cleaner and should only be used to vacuum dry dust. · The manufacturer is not liable for any damage caused by incorrect use or operation. · Do not vacuum matches, glowing ashes or cigarette ends using the appliance. Avoid picking up hard, pointed objects as these may damage the appliance or the paper filter. · Do not expose the appliance to the effects of the weather, humidity or sources of heat. Changing the microfilter We recommend replacing the microfilter at each fifth paper filter replacement, and at the latest when there is a clean dust bag and the dust level indicator is completely red with the nozzle raised. Cleaning As required, wipe the housing and the paper filter compartment with a damp cloth. Occasionally vacuum the floor nozzle and brush-heads with the crevice nozzle. Paper filter Progress P60 Carrying and Storage Open the lid and fold up. Remove the used microfilter by means of the clean hygienic tabs (figure) and dispose of it with the household waste. Insert the new microfilter and close the cassette. To make the appliance easier to store and carry, slide the floor nozzle into the tool rail. HEPA filter A highly effective special filter belonging to Class "S". HEPA filter ­ further supplies available from Progress customer service. Parking System For storing the suction pipe and nozzle during short pauses in vacuuming. The bracket on the nozzle is slid into the parking rail on the appliance. 15 What do I do, if . . . . . . it is difficult to push the nozzle Reduce the power setting on the appliance. the motor thermal cut-out is activated If the motor is overloaded, e. g. due to a full filter bag or blocked accessory, the thermal cutout shuts down the motor. [. . . ] the motor thermal cut-out is activated If the motor is overloaded, e. g. due to a full filter bag or blocked accessory, the thermal cutout shuts down the motor. In this case, switch off the appliance, unplug from the mains, and leave the motor to cool down. Check paper filter bag, suction tube and suction hose; remove any blockage. [. . . ]