User manual QUANTUM STT6X01U2

[. . . ] C E R TA N C E EASY INSTALLATION FOR PC SYSTEM REQUIREMENTS · Windows 98, Windows Me, Windows 2000, Windows 2003, or Windows XP operating system · Personal computer with at least one unused USB port (Hi-Speed USB 2. 0 recommended for Travan 40 GB drive) · CD-ROM drive (for software installation) To install your new Travan Portable USB tape drive, follow the simple steps listed below. For detailed installation instructions and troubleshooting tips, see the online manual on the Certance Resource CD that came with your tape drive. TRAVAN PORTABLE USB TAPE DRIVE d 1. [. . . ] Note: For European and Asia-Pacific models, plug adapters are included. FIGURE 2 4. Turn on the tape drive. Move the power switch on the back of the drive to the ON (up) position. Connect the USB cable. Note: Your computer must be powered on and booted up before you attach the USB drive. (The back of your system may look different than the one pictured. ) See Figure 3. 6. Install the USB driver (Windows XP/Windows 2003). FIGURE 3 If you are running Windows XP or Windows 2003, after Windows finds the plug and play device, the Found New Hardware wizard will open. Select Don't search, I will choose driver to install and then click Next. On the hardware type screen, scroll through the list, select Tape Drives and then click Next. Select the device driver you want to install: Manufacturer: (standard tape drives), Model: IDE (QIC-157) tape drives. Go into the Windows Device Manager (from the Control Panel, double-click on System, then select the Hardware tab, then click on the Device Manager button) to make sure that the tape drive is listed. 7. Remove the Resource CD from your CD-ROM drive and insert the TapeWare CD. FIGURE 4 Follow the online instructions to install TapeWare. 8. [. . . ] Certance reserves the right to change, without notice, product offerings or specifications. No part of this publication may be reproduced in any form without written permission from Certance LLC. [. . . ]