User manual ROBBE POWER PEAK ULTIMATE

[. . . ] - Be sure to keep the cooling slots unobstructed to provide good air circulation - don't stand the charger on a carpet or felt surface. - Do not set up the charger and batteries on a flammable surface, and never leave the unit operating unsupervised. [. . . ] Up to ten such sets of parameters can be stored in spot memories 0 to 9 and called up at any time. The setup menu required for this appears immediately when you select manual mode. Note: you can only change values in the first line when the arrow symbol is flashing. TYPE NICD Selecting the spot memory: Select the MEMORY SELECT menu with the + button, confirm with ENTER, select the desired spot memory with the +/- buttons and confirm with ENTER. At the EXIT menu point you can jump to the "AUTO / MANUAL" select option with the ENTER button; under SOUND press the ENTER button to activate or disable the buzzer. to initiate the charge or discharge process confirm the START menu point with the ENTER button. You can now press the MODE button to select CHARGE, DISCHARGE or DISC-CHAR. When you next connect the charger to its power supply, the unit automatically reverts to the spot memory you last used. Use the + / - buttons to change the current during charging or discharging. Spot memory, cell count, capacity, charge current and discharge current Error messages The following error messages can be erased by pressing any button once you have eliminated the problem. [. . . ] Don't end the charge or discharge process simply by disconnecting the battery pack; always stop the process by pressing the MODE button. 8415, the charger can also be operated from the 230 Volts mains supply, turning it into a universal 230 V AC and 12 V DC charger. [. . . ]