User manual ROCKTRON V100
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROCKTRON V100. We hope that this ROCKTRON V100 user guide will be useful to you.
Manual abstract: user guide ROCKTRON V100
Detailed instructions for use are in the User's Guide.
[. . . ] USER'S MANUAL
May be covered by one or more of the following: U. S. [. . . ] 6 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Introduction
Congratulations on your purchase of the Rocktron Velocity 100 power amplifier!The Velocity 100 was designed to provide great flexibility and high reliability. This singlerackspace amplifier provides 55 watts of power per channel into a 4 ohm load, or 40 watts per channel into an 8 ohm load. In addition, the amplifier incorporates thermal protection circuitry, as well as protection from overvoltage, undervoltage and any shorts to the power supplies. This manual will introduce you to the Velocity 100 and its features, please keep it for future reference.
1
Front Panel
1
POWER switch/LED When lit, the LED indicates that the Velocity 100 is powered and ready for operation.
Note: There are no volume adjustments on the Velocity 100. To ensure speaker life, use the output level of the unit connected to the Velocity 100's inputs as the master volume control. Begin operation with this output level down, then slowly bring up the volume to the desired level.
2
Rear Panel
1
IN jack (Ch. 2): This ¼" jack provides an input to Channel 2 from the output of a preamp or the device in an effects chain. [. . . ] The fuse can be found inside the fuse cover module after it is pulled out.
G
Note: A small compartment is also provided within the fuse cover module for storing a spare fuse.
After replacing the fuse with another of identical specifications, push the fuse cover module fully back into place, ensuring that the fuse has snapped onto the fuse holder inside the power inlet module.
6
Specifications
Input Impedance Maximum Input Maximum Gain Dynamic Range Frequency Response Output Power (both channels driven @ 1% THD) 10K +20dBu 26dB over 100dB ±1dB, 20Hz - 20kHz 55 watts @ 4 40 watts @ 8 28 watts @ 16 402 watts, 3. 5A @ 115VAC
Power Consumption
* CE Approved *
Rocktron Corporation 2870 Technology Drive Rochester Hills, MI 48309 USA Customer Service: Fax Number: World Wide Web: Email:
(248) 853-3055 (248) 853-5937 http://www. rocktron. com rocktron@eaglequest. com
7 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ROCKTRON V100
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROCKTRON V100 will begin.