User manual ROWENTA FC281

[. . . ] to avoid deterioration to the batteries: · Never exceed 20 hours of charging. ⷠBefore using for the first time, charge the appliance using the adapter for 14 hours. [. . . ] ⷠBefore using for the first time, charge the appliance using the adapter for 14 hours. For your safety, this appliance complies with the applicable standards and regulations (LowVoltageDirective, Electromagnetic Compatibility, Environmental. Check that the voltage of your electricity supply matches the voltage of your appliance. Any error when connecting the appliance can cause irreparable harm, not covered by the guarantee. ⷠThe installation of the appliance and its use must however comply with the standards in force in your country. ⷠThis appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. To remove the batteries, undo the screws, remove the casing, take out the batteries and cut the wires. The appliance must be disconnected from the supply mains when removing the battery . ⷠYou can then place the cutting head under cold runningwater for 5 to 10 seconds. ⷠShake the cutting head vigorously then leave it to dry before using it again. ⷠWarning, the cutting head must be clipped correctly onto the appliance when it is fitted. LUBRICATION To ensure your clipper efficiency and durability, it is essential that the cutting blades be lubricated before each use with the lubricant supplied or, failing this, with sewing machine oil. [. . . ] ⷠShake the cutting head vigorously then leave it to dry before using it again. ⷠWarning, the cutting head must be clipped correctly onto the appliance when it is fitted. [. . . ]