User manual ROWENTA IS1400 SERIES PRO COMPACT STEAMER

[. . . ] · Appliance should always be turned off before plugging or unplugging. Never yank the cord to disconnect from outlet, instead grasp plug and pull to disconnect. Scalding may occur if the hose adapter is removed while using the appliance. · Always disconnect appliance from electrical outlet when filling with water, emptying or when not in use. [. . . ] Test fabric for color fastness in an unobtrusive part of the garment (inner seam). If steaming in a low position near floor, straighten hose up and out frequently to clear condensation. If hose becomes clogged, it will make a gurgling noise or the amount of steam will be reduced. · During operation, the steamer hose may make a gurgling noise. If it begins to gurgle, extend hose up and out to move excess moisture back into the base. 5 Warning: Never steam clothes while they are being worn. Use caution and avoid prolonged contact. Accessories (depending on model) Never touch the steam head until it cools completely. Before using any of the accessories on upholstery or garments, be sure to consult the manufacturer's labels regarding their recommendations for garment care. Reminder: When using accessories steam only in an up and down vertical motion. Never use the steam head in a horizontal position and never steam with your steam head upside down. Upholstery brush* Be sure unit is unplugged and completely cool before attaching accessories. The upholstery brush is used to aid steam penetration into difficult or heavy fabrics for faster results. · Attach the upholstery brush to the steam head by lining up the bottom of the brush with the bottom of the steam head. Gently push the top of the brush into place on the steam head until it clicks into place. · Gently brush the area to be steamed with the grain or nap of the fabric. · Remove the upholstery brush once unit is unplugged and completely cool. Remove it by pressing on the tab on top of brush while pulling it forward. Fabric brush* Be sure unit is unplugged and completely cool before attaching accessories. The fabric brush opens weave of the fabrics for better steam penetration. · Attach the fabric brush to the steam head by lining up the bottom of the brush with the bottom of the steam head. Gently push the top of the brush into place on the steam head until it clicks into place. · Gently brush the area to be steamed with the grain or nap of the fabric. · Remove the fabric brush once unit is unplugged and completely cool by pressing on the release tab on top of brush while pulling it forward. *depending on model: this is either equipment specific to certain models or available as an optional accessory. 6 Crease attachment* Be sure unit is unplugged and completely cool before attaching accessories. The crease attachment is used to make pant creases easily or to remove stubborn wrinkles. · Fasten the crease attachment to the steamer by sliding onto the steam head so it fits over the raised channels. [. . . ] Your steamer has a build-up of scale because it has not been rinsed out regularly. Letters will be accepted at this address and packages without a return authorization number will be refused or forwarded to a service center. SERVICE CENTER INFORMATION: If your appliance needs service, ship the product to your nearest regional service center. boxes please), include a brief note describing the issue, and include a copy of the sales receipt if the product is in warranty. [. . . ]