User manual ROWENTA PROCERAM SO 9020

[. . . ] If an extension cord is absolutely necessary, a 12ampere cord should be used. Care should be taken to arrange the cord so that it can not be pulled or tripped over. Your Rowenta appliance is intended for household use only. SAVE THESE INSTRUCTIONS Professional USA 3 C DEF G H I B A Made in Germany L K J Description: Water filling inlet Spray nozzle Burst of steam button Spray button Variable steam control Indicator light Temperature control dial Swivelling cord protector Supply cord Transparent water tank Soleplate according to model ­ Stainless steel ­ Titan Plus L Water level indicator s A B C D E F G H I J K Features vary by model. [. . . ] It is normal for a small amount of smoke to be produced the first time the iron is used. 3-WAY AUTO-OFF (NOT ON ALL MODELS) If the iron is not moved while it is switched on, an internal safety switch will turn it off. It will turn off in 8 minutes if left vertically or in 30 seconds if left on its soleplate or tipped over. To switch the iron on again, move the iron or gently shake it. Made in Germany Wait until iron is fully reheated before use. Hold the appliance upright so that the water filling inlet is horizontal. Fill the iron with tap water to the maximum level mark (see water usage for more informations). Adding water: If you need to add water during ironing, unplug the iron and repeat above steps. Ensure iron is fully reheated after filling (temperature indicator light goes out) before ironing. SELECTING THE TEMPERATURE To avoid damage to clothes from dust or dirt that may collect in the iron, we recommend that for the first use or after the iron has been stored for some time that you first iron an old cloth, testing both the steam and burst of steam feature. Set the temperature control dial according to the type of fabric you are ironing. Slide the variable steam control completely to the left and empty any water left in the tank. Integrated cord wrap: For easy storage, the cord can be wound loosely around the cord wrap once the iron has cooled off completely. To protect the soleplate always store the iron on its heel. Mad WATER TO USE IN ROWENTA IRONS TAP WATER: Rowenta irons are designed to be used with REGULAR TAP WATER (up to 12 grains of hardness). If your water is harder than this, Rowenta recommends mixing half tap water with half distilled water which reduces the hardness; or inexpensive spring water. Never use 100% distilled water since this can cause the iron to spit and leak. e in Germ any 7 SOFTENED WATER: There are many types of household water softeners and the water from many of them is perfectly acceptable for use in an iron. However, some types of softeners, particularly those that use chemicals such as salt, can cause the iron to leak or spit during use. If you experience this type of problem, we recommend that you try using inexpensive bottled spring water or untreated tap water. Once you have changed water it will take several uses to correct the problem. Rowenta recommends trying the steam function for the first time on an old towel or cloth to avoid damaging your clothes. [. . . ] Rowenta recommends trying the steam function for the first time on an old towel or cloth to avoid damaging your clothes. IRON AND OTHER IMPURITIES: If your water supply contains large amounts of iron or organic matter, these minerals can collect inside the iron and eventually appear as brown stains. If you experience these problems Rowenta recommends using inexpensive bottled spring water. [. . . ]