User manual ROWENTA SILENCE FORCE 4A RO6441EA

[. . . ] User, and will appliance oneself can be dangerous for the invalidate the guarantee. 7 EN DESCRIPTION 1 Cover 2 Cover opening 3 Carrying power nozzle 4 Power cord rewind button 5 On/Off button 6 Bag change indicator 7 Vacuum inlet 8 ROWENTA EXTREME SILENCE SYSTEM 9 Electronic power switch 10 a – Vertical parking b – Horizontal parking 11 Bag compartment 12 Bag support for Wonderbag* bag or synthetic bag* 13 Bag in vacuum cleaner sensor 14 Bag support sensor 15 (H)EPA* filter cassette compartment 16 (H)EPA* filter cassette sensor 17 a - (H)EPA* filter cassette (ref. RS-RT2274) Accessories 19 Flexible hose with power nozzle ERGO COMFORT SILENCE 20A* a - Ergonomic nozzle ERGO COMFORT SILENCE b - In-built brush (EASY BRUSH) c - Manual power switch (POWER CONTROL) 20B* a - Ergonomic nozzle ERGO COMFORT SILENCE b - Manual power switch (POWER CONTROL) c - In-built brush (EASY BRUSH) 21 Metal telescopic tube ERGO COMFORT SILENCE a - Nozzle/tube locking system (LOCK SYSTEM) b – Tube adjustment button (TELESCOPIC SYSTEM) 22 All floor type nozzle ERGO COMFORT SILENCE a - Tube/nozzle locking system (LOCK SYSTEM) b - 2 position button: brush in retracted position for rugs and carpets / brush in advanced position for parquets and smooth floors. 23 Telescopic crevice tool* 24 Upholstery nozzle* 25 Rectangular parquet nozzle* 26 Parquet nozzle DELTA* 27 Turbobrush* 28 Mini turbobrush* BEFORE USING FOR THE FIRST TIME Thanks to the exclusive ROWENTA EXTREME SILENCE SYSTEM we promise you’ll notice just how much quieter your vacuum cleaner is. [. . . ] * Depending on models: either equipment specific to certain models or available as an optional accessory. 8 EN USING THE APPLIANCE 1 • Assembling the elements of the appliance Push the flexible hose into the vacuum inlet (Fig. €¢ Push the metal telescopic tube into the end of the power nozzle until you hear a locking ‘click’ (Fig. 2) (to release it, push the locking button on the tube and remove it). €¢Push the all floor type nozzle (22) into the end of the metal telescopic tube until you hear a locking ‘click’ (Fig. 3) (to release it, push the locking button on the nozzle and remove it). €¢ Adjust the telescopic metal tube to the required length using the telescopic system (TELESCOPIC SYSTEM) (Fig. 4) Fit the appropriate accessory to the end of the metal telescopic tube or the power nozzle: - For rugs and carpets: use the all floor type nozzle in the retracted brush nozzle position or the Turbobrush* (fibres and animal hairs). : - For parquets and smooth floors: use the all floor type nozzle in the advanced position or, for a better result, use the parquet nozzle*. - For corners and hard to reach spots: use the telescopic crevice tool*. - For furniture and fragile surfaces: use the brush built into the power nozzle (EASY BRUSH) or the upholstery nozzle*. If you notice that your vacuum cleaner is not working as well as it should be, turn the power up to maximum and hold the lifted nozzle above the floor. A) If your vacuum cleaner is fitted with a Wonderbag* (18a) : IIMPORTANT Wonderbag* UNIVERSAL (Classic, Freshline, Endura ref. WB4xxx) bags are available from retail outlets and at Approved Service Centres. IMPORTANT Wonderbag* COMPACT bags can’t be used on this appliance. Using them could damage the vacuum cleaner and may invalidate the appliance guarantee. Place the bag support in the bag compartment and fit the bag inside the compartment (Fig. Make sure that the bag is correctly positioned before closing the cover. B) If your vacuum cleaner is fitted with a synthetic (textile) bag* (18b) : Synthetic bags* (ref. Check that the zip is properly closed once more before putting the bag back in again (Fig. Place the synthetic bag* on the bag support using its cardboard holder (Fig. 25), place the bag support in the bag compartment and fit the bag inside the compartment (Fig. [. . . ] 4 • Cleaning your vacuum cleaner Wipe the body of the appliance and the accessories with a soft cloth (Fig. TROUBLESHOOTING IMPORTANT: As soon as you notice that your vacuum cleaning is not working as well as it should be and before carrying out any checks, switch it off using the On/ Off button. If your vacuum cleaner won’t start • The appliance has not got any power: check that the appliance is correctly plugged in. If your vacuum cleaner doesn’t have any suction power • An accessory or the flexible hose is blocked: unblock the accessory or the flexible hose. [. . . ]