User manual ROWENTA STEAM BRUSH STEAM N PRESS DA70

[. . . ] Do not leave appliance unattended while plugged in or on an ironing board. Burns can occur from touching hot metal parts, hot water, steam or hot soleplate cover. The use of accessory attachments not recommended by Rowenta may result in fire, electric shock or personal injury. [. . . ] ATTACHING AND REMOVING THE SOLEPLATE COVER Attaching the soleplate cover The Steam 'n Press should be unplugged and completely cool when removing or attaching the soleplate cover. To attach the soleplate cover (K) to the Steam 'n Press, hold the soleplate cover by the ribbed finger grips (J) and slide the cover over the soleplate. Turn the soleplate cover lock (G) half a turn (180°) to the left to lock the soleplate cover into position. Your appliance can be used as a Steambrush once cover is attached. Reference "Steambrush Function" section of instructions for further use information. 6 Removing the soleplate cover The steambrush should be unplugged and completely cool when removing or attaching the soleplate cover. To remove the soleplate cover (K) turn the soleplate cover lock (G) a half turn (180°) to the right. Grip the soleplate cover by the ribbed finger grips (J) on both sides as shown and pull towards the tip of unit to remove. Reference "Ironing Function" section of instructions for further use information. IRONING FUNCTION The soleplate of the Steam 'n Press will smooth out tough wrinkles from clothes and press in sharp creases and pleats. Do not touch or remove the soleplate cover without letting the soleplate cool down. Remove the soleplate cover as indicated in instructions called "Removing the Soleplate Cover". Plug in the appliance, place it on its side and wait approximately one minute for it to reach full temperature before using. During use or while unit is heating or cooling, do not rest it on its soleplate. Place product on its side on a firm flat surface, as it will be hot. ! Never iron clothes while they are being worn. 7 Selecting the temperature Set the thermostat control dial (A) according to the type of fabric you are ironing. Fabric synthetics nylon polyester silk wool cotton linen Temperature regulator q (low temperature) qq (medium temperature) qqq (high temperature) Start at low temperature q and graduate to high temperature q q q. For delicate fabrics we recommend carrying out a test on an unobtrusive part of the garment (inner seam). Steam can only be produced when the thermostat is aligned to q q q setting. STEAMBRUSH FUNCTION Using for the first time ! min n mi When the Steam 'n Press is plugged in the soleplate heats. Do not touch or remove the soleplate cover without letting the soleplate cool down. Make sure soleplate cover is securely in place before using the steambrush function. Please reference section in instructions called "Attaching the Soleplate Cover". Plug in your Steam 'n Press and set the thermostat to the qqq steam setting. To begin steaming, press the burst of steam button 4 to 5 times to prime the unit. [. . . ] However, some types of softeners, particularly those that use chemicals such as salt, can cause the appliance to leak or spit during use. If you experience this type of problem, we recommend that you try using inexpensive bottled spring water or untreated tap water. Once you have changed water it will take several uses to correct the problem. [. . . ]