User manual RUSSELL HOBBS BLACK SATIN COFFEE MAKER

[. . . ] 12 Fill the machine from a jug or the carafe, not directly from the tap. 16 Don't use the coffee maker for any purpose other than those described in these instructions. 19 Keep the coffee maker, carafe, and cable away from hotplates, hobs, and burners. 20 Don't use accessories or attachments other than those we provide. [. . . ] 14 Check that the carafe is on the hotplate, and the coffee maker lid is closed. 15 If you're making less than 5 cups of coffee, press the e button to turn the brew strength feature on. 18 After a few seconds, coffee will drip into the carafe. pause and pour 19 You may remove the carafe to pour coffee at any time. This may not sound much, but its more than enough time to pour a couple of cups. 5 coffee later ­ timer 21 Check that the carafe is on the hotplate, and the coffee maker is plugged in. nb If you go past the hour or minute you want, you can't go back, you have to keep pressing the h (hour) and m (minute) buttons to you get back round to it again. Check that the time is set to the appropriate AM or PM setting, if it isn't, keep pressing the h button till it is. nb If you unplug the coffee maker, the time will reset to AM 12:00, the next time you plug it in. nb If you don't press the h or m button to change the brewing time within about 5 seconds, the coffee maker will come out of `program mode' and the display will show the time. 26 Press the h and m buttons to select the time you want the coffee maker to make you coffee. Check that the time is set to the appropriate AM or PM setting, if it isn't, keep pressing the h button till it is. 27 Press the v button to activate the timer, the v light will come on, and AUTO will appear in the display. The v light will go out, AUTO will disappear from the screen, then the 2 light will come on and ON will appear in the screen. 29 When the brewing process has finished, the coffee maker will stay on for 2 hours while the hotplate keeps your coffee hot, then the coffee maker will auto shut-off (see "auto shut-off" - next page). 30 If you need to cancel the timer before brewing has started, press the v button, the v light will go out, and AUTO will disappear from the display. 31 If you need to stop the coffee maker whilst it's brewing, press the 2 button. brew strength e Use the brew strength feature e when brewing less than 5 cups of coffee. The brew strength feature slows down the brewing process, so your coffee will have the same strength, as coffee from a full carafe. 32 The e (brew strength) button can be pressed before or during the brewing process, to activate or deactivate the brew strength feature. 33 Press the e button to activate the brew strength feature, the e icon will show up in the display. 34 Press the e button to deactivate the brew strength feature, the icon will disappear from the display. 6 finished? 35 When the carafe is empty, press the 2 button, the 2 light will go out. Unplug the coffee maker and let it cool down fully before cleaning, or for 10 minutes before refilling. warning watch out for steam when you open the lid to refill the filter. [. . . ] Follow the instructions on the descaler, then fill the water tank, and run the machine without, to ensure no residues are left. 7 connection The product must be earthed. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Don't use a non-rewireable/moulded plug unless the fuse cover is in place. If you remove the plug, dispose of it. spare parts Note the Model No (on the rating label) and the parts, ring 0845 658 9700 for prices, or email service@saltoneurope. com, then purchase using VISA or MASTERCARD. service The product isn't user-serviceable. [. . . ]