User manual RUSSELL HOBBS CARVING KNIFE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RUSSELL HOBBS CARVING KNIFE. We hope that this RUSSELL HOBBS CARVING KNIFE user guide will be useful to you.


RUSSELL HOBBS CARVING KNIFE : Download the complete user guide (123 Ko)

Manual abstract: user guide RUSSELL HOBBS CARVING KNIFE

Detailed instructions for use are in the User's Guide.

[. . . ] 2 7 After use, clean the blades, replace them in their protective sleeve, and store them out of reach of children. 8 Unplug the knife before attaching or removing blades and before cleaning. 10 Don't apply pressure to the knife and don't use a sawing action. [. . . ] 8 Insert the free ends of the blades into the slot on the front of the handle and push gently until they click into place. 9 Lay the knife down on or near the cutting board. 13 Hold the knife by the handle, with your forefinger on the safety lock/switch. 15 The switch is spring-loaded, the knife will operate only while it is pressed in. 19 Use a carving fork to steady the food being cut ­ don't use your other hand. 20 Don't try to reposition the food while you're holding the knife. 21 If you have to reposition the food, release the switch, set the knife down, move the food, steady it with the carving fork ­ then pick up the knife and start again. 22 When you finish, or if you need to stop cutting to do anything else, release the switch, set the knife down, and unplug it. 23 Don't run the motor for more than 7 minutes, or it may overheat. After 7 minutes, switch off for at least 5 minutes, to let the motor cool. 5 removing the blades 24 Release the switch, set the knife down, and unplug it. 25 Hold the handle of the knife, and press the blade release button 5. 27 Hold the blades by the finger grips and gently pull them out of the slot. cleaning the blades 28 One of the blades has a "keyhole" slot, the other is fitted with a rivet. To separate the blades, slide the rivet along the slot to the large hole. 29 Wash the blades in hot soapy water, rinse, dry thoroughly, then rejoin them and replace them in their protective sleeve. 30 The blades are very sharp, don't leave them where they may be touched accidentally by you or anyone else. 31 The blades are dishwasher safe. cleaning the handle 32 Wipe the handle with a soft cloth dampened with a small amount of proprietary disinfectant. 34 Don't use harsh or abrasive cleaning agents or solvents. cutting meat 35 Cut across the grain. [. . . ] If it's not working, read the instructions, check the plug fuse and main fuse/circuit breaker. If that doesn't solve the problem: Pack carefully, with a note of your name, address, day phone number, and what's wrong. If under guarantee, say where and when purchased, and include proof of purchase (till receipt). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE RUSSELL HOBBS CARVING KNIFE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RUSSELL HOBBS CARVING KNIFE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.