User manual RUSSELL HOBBS STEAMGLIDE PROFESSIONAL

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RUSSELL HOBBS STEAMGLIDE PROFESSIONAL. We hope that this RUSSELL HOBBS STEAMGLIDE PROFESSIONAL user guide will be useful to you.


RUSSELL HOBBS STEAMGLIDE PROFESSIONAL : Download the complete user guide (183 Ko)

Manual abstract: user guide RUSSELL HOBBS STEAMGLIDE PROFESSIONAL

Detailed instructions for use are in the User's Guide.

[. . . ] 2 18 Don't use the iron for any purpose other than those described in these instructions. 19 Take care not to scratch the soleplate ­ avoid buttons, zips, etc. 20 The iron has a protective thermal fuse, which will blow if it overheats. [. . . ] Turn the temperature control to bring the setting you want next to the 5 mark (#3). When the iron reaches the temperature you set, the indicator light will go off. It'll then cycle on and off as the thermostat operates to maintain the temperature. 3 temperature setting guide label marking temperature dot setting j cool ­ nylon, acrylics, polyester · k warm ­ wool, polyester mixtures ·· l hot ­ cotton, linen · · ·/max i do not iron , If the instructions on the fabric label differ from this guide, follow the instructions on the label. reducing temperature 18 Reducing the temperature takes a bit longer, as the element has to lose the heat it has built up, so be patient. It's best to organise your ironing so that you don't need to reduce the temperature ("preparation" page 3, point 2). 19 When steam ironing, you must set the temperature control at S or higher. 20 If you don't, you'll get water on your clothes, not steam. 21 Move the steam control to the setting you want, S = no steam, # = high steam (#3). 23 This works with dry or steam ironing, as long as there's water in the reservoir. 28 You may have to press it 2 or 3 times to pump water through the system. steam ironing spray shot of steam 29 This works with dry or steam ironing, as long as there's water in the reservoir, and the temperature is above S. 34 You may have to press it 2 or 3 times to pump water through the system. 4 dry ironing 36 If you're going to be dry ironing for 20 minutes or more, empty the reservoir first, to avoid spontaneous bursts of steam. 38 Wait till the indicator light goes out, then start ironing. vertical steaming 39 Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics. 40 Check that there's adequate ventilation behind the fabric, otherwise moisture may build up, causing mildew. 41 Check that there's nothing behind the fabric that may be damaged by the steam. 46 Press the S button (you're using the "shot of steam" function vertically). 47 You may have to press it 2 or 3 times to pump water through the system. 48 Leave 4 seconds between shots, to let the temperature build up. after use 49 Turn the temperature control to ·, move the steam control to S. [. . . ] To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Don't use a non-rewireable plug unless the fuse cover is in place. If you remove the plug, dispose of it. wheelie bin symbol To avoid environmental and health problems due to hazardous substances in electrical and electronic goods, appliances marked with this symbol mustn't be disposed of with unsorted municipal waste, but recovered, reused, or recycled. service If you ring Customer Service, please have the Model No. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE RUSSELL HOBBS STEAMGLIDE PROFESSIONAL




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RUSSELL HOBBS STEAMGLIDE PROFESSIONAL will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.