User manual RUSSELL HOBBS TORNADO PET VACUUM 2400W 18094

[. . . ] cleaning the car), connect it to the electricity supply via a residual current device (RCD), with a rated residual operating current not exceeding 30mA. 8 Keep an eye on the cable, so it doesn't catch on anything, or trip anyone up. 9 If you're using the cleaner on stairs, sit it where it can't topple, and keep it below you, so if it does topple, it won't land on you. 11 Unplug the cleaner and rewind the cable when not in use, before moving and before cleaning. [. . . ] 17 Plug the cable into a socket near the area to be cleaned (switch the socket on, if it's switchable). 18 Press and release the on/off switch 3, to turn the cleaner on. plug in caution If you've accidentally pressed the on/off switch 3, the cleaner will work when you switching on cleaning 19 Move the tool over the surface, cleaning a small area at a time. 20 When you move to a new area, overlap the previous area, to make sure none of the surface is missed. switching off 21 If you've finished, if you want to change tools, or if you just want to stop for a rest, press and release the on/off switch 3, to turn the cleaner off. 23 Unplug the cleaner (switch the socket off first, if it's switchable). 24 Stand clear of the cable, and press the C button ­ the cable will rewind. If it catches on anything, stop pressing, and it'll stop rewinding. 26 We've tried not to make it too powerful, to avoid wrecking your home, so you may need to push the plug end into the storage area manually. finished cleaning? removing and emptying the bin 27 You don't have to empty the bin after each use, but it's a very good idea. Your cleaner will happily work till it's chock full, but you'll be wasting energy swirling yesterday's dust around. 28 There's a "bin full light" on top of the cleaner, behind the suction control. 29 If it lights, the bin is full ­ you should empty it right away. 30 Switch off, unplug, set it down on its wheels, and leave it for a minute, to let the dust settle. 31 Squeeze the locks on the hose end, and pull the hose out of the inlet (removing the hose isn't essential, but it makes life so much easier). 32 Squeeze the latch on the front of the cleaner into the cleaner, and open the cover. 33 Raise the handle on top of the bin, and lift the bin out of the cleaner. 34 Ease the bottom of the bin lock away from the catch, and rotate the bin lid backwards, on its hinges, till it comes free of the bin. 35 Lower the bin into your dustbin, then turn it upside down to empty it. , if you want to check the filters, jump to point 43, otherwise carry on. 37 Locate the rear of the bin lid on the hinges at the rear of the bin. 38 Rotate it forwards, till the bin lock is secured over the catch on the front of the bin. 39 Lower the bin into the cleaner, then push it gently back, towards the rear of the cleaner, to lock it into place. 41 Close the cleaner ­ you'll hear the latch click into place. You'll hear a click as it locks into position. checking the filters 43 When you've emptied the bin, check the filters. [. . . ] 75 Lower it into the outlet on top of the cleaner. close the cleaner 76 Close the cleaner ­ you'll hear the latch click into place. You'll hear a click as it locks into position. cleaning the cleaner 78 Switch the cleaner off and unplug it before cleaning. If it's not working, read the instructions, check the plug fuse and main fuse/circuit breaker. If that doesn't solve the problem, don't take the cleaner back to the place you bought it ­ they won't be able to fix it. [. . . ]