User manual RUSSOUND 854P

[. . . ] PRODUCT OVERVIEW The 854P Plasma Tabletop IR Receiver receives IR signals from a handheld IR remote control and relays these signals to the audio-video equipment for operation from another room. [. . . ] Russound assumes no responsibility for defects resulting from abuse or servicing performed by an agency or person not specifically authorized in writing by Russound. Damage to or destruction of components due to excessive power voids the warranty. To return for repairs, the unit must be shipped to Russound at the owner's expense, along with a note explaining the nature of the service required. Be sure to pack in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit. Before returning a unit for repair, call Russound at (603) 659-5170 for a Return Authorization number. Write the RA number on the shipping label and ship to: Russound, ATTN: Service, 5 Forbes Road, Newmarket NH 03857 Russound sells product only through authorized Dealers and Distributors to ensure that customers obtain proper support and service. Any Russound product purchased from an unauthorized dealer or other source, including retailers, mail order sellers and online sellers will not be honored or serviced under existing Russound warranty policy. Any sale of products by an unauthorized source or other manner not authorized by Russound shall void the warranty on the applicable product. SPECIFICATIONS Receive Frequency Range: Transmit Frequencies: Range: Power: Dimensions: Cord Length: Connector Type: Finish: 36kHz to 58kHz 40kHz and 56kHz On Axis ­ 40ft to 50ft (12. 2-15. 2m) 30º Off Axis ­ 5ft to 20ft (1. 5-6. 1m) 12VDC 31mA max. [. . . ] In remote installations, it may be preferable to hard wire to the 4-position termination plug on the 857 or IRB-6 connecting block. 846C 12VDC POWER SUPPLY 854P IR RECEIVER +12VDC STATUS 857 INFRARED CONNECTING BLOCK IR CONFIRM 1 DIRECT INSTALLATION +12VDC IR RECEIVER IN POWER 2 EMITTERS 3 REMOTE INSTALLATION IR COMMON IN +12VDC 4 5 GND STATUS 6 SIGNAL DESIGNED IN USA MADE IN CHINA AW2260AB 22 GAUGE 4 CONDUCTOR WIRE 857 CONNECTING BLOCK IR RECEIVER CONNECTION IRB-1 CONNECTING BLOCK 854P IR RECEIVER [. . . ]