User manual RUSSOUND 862P PLASMA EYE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RUSSOUND 862P PLASMA EYE. We hope that this RUSSOUND 862P PLASMA EYE user guide will be useful to you.
Manual abstract: user guide RUSSOUND 862P PLASMA EYE
Detailed instructions for use are in the User's Guide.
[. . . ] PRODUCT OVERVIEW
The SaphIR 862P Plasma Eye receives IR signals from a handheld IR remote control and relays these signals to the audio/video equipment for operation from another room. Mounts through a circular hole with a diameter of 0. 5", requires a minimum clearance of 2. 0" behind the face of the mounting surface, and will mount in a panel with a maximum thickness of 1. 75".
SaphIR
862P Plasma Eye
Mini Infrared Receiver Plasma and CFL Friendly
Instruction Manual
FEATURES
· Plasma-friendly - can be placed near plasma TVs and displays. [. . . ] Rethread the nut onto the barrel until it is snug against the rear of the mounting surface. If necessary, use one or both of the included washers for a more secure installation into soft or thin materials.
WIRE CONNECTIONS
Direct Connection from 862P Plasma Eye to Connecting Block Connect the SaphIR 862P Plasma Eye to the 857 or equivalent connecting block. Connect GND (GROUND), IR (SIGNAL) and Voltage (+12VDC ) to connector on the 857.
CONNECT TO 846C OR 1201A POWER SUPPLY 12 VDC
+12VDC
STATUS
857 INFRARED CONNECTING BLOCK IR CONFIRM
1
IR RECEIVER IN
IR COMMON IN
Mounting Surface Front
Max thickness 1. 75" Barrel
Mounting Surface Rear Washer
+12VDC 5
GND STATUS
SIGNAL
DESIGNED IN USA MADE IN CHINA
857 CONNECTING BLOCK
SIGNAL (White) +12VDC (Black) GND (Black)
Panel Face Min. clearance 2. 0"
Nut
EMITTER PORTS
Bezel
Plasma Filter
+12VDC
POWER
2
EMITTERS
3 4 6
WIRE CONNECTIONS
Extended Leads from 862P Plasma Eye to Terminal Strip to Connecting Block The extended connection between the IR receiver and the connecting block should be made with twisted-pair wiring (i. e. , CAT-5e cable). It may be necessary to use shielded twisted-pair wiring if the wiring is exposed to interference from power wiring centers or from broadcast signals (FM, TV, etc. ) located nearby. The installer should determine the cable type needed to suit the local conditions of the installation. A terminal strip is included for extending the leads.
PACKAGE INCLUDES:
SaphIR 862P Plasma Eye IR Receiver (1) Colored Bezel (3: white, black, brass) Terminal Strip (1) Screws (2) Two-way Mounting Tape (1) Washers (2)
862P Eye SIGNAL
862P Plasma Eye
GND (Black)
CAT-5e BL
857 SIGNAL
SPECIFICATIONS
Receive Frequency: 36kHz to 58kHz Transmit Frequency: 40kHz and 56kHz Range: On Axis 55ft to 80ft 30º Off Axis 30ft to 55ft Power: 12VDC 31mA max. Dimensions: 0. 46" Diameter x 2. 03"D Mounting Cord Length: 6. 5 ft.
+12VDC GND
GR/GRW +12VDC BR/BRW OR/ORW BLW GND GND GND
SIGNAL (White)
+12VDC (Black)
Blue/White Open Blue Blue/White
Terminal Strip Green Green/White Brown Brown/White
Orange Pair Open
LIMITED WARRANTY
Drain Orange Pair and Blue/White to GND on 857 CAT-5e cable Green Green/White Brown Brown/White
+12VDC
STATUS
+12VDC IR RECEIVER IN
POWER
IR COMMON IN +12VDC
GND STATUS
Orange Orange/White Blue
SIGNAL
DESIGNED IN USA MADE IN CHINA
The Russound® SaphIR 862P Plasma Eye is fully guaranteed for Two (2) years from the date of purchase against all defects in materials and workmanship. During this period Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor. For this warranty to apply, the unit must be installed and used according to its written instructions. The unit must be returned to Russound at the owner's expense and with prior written permission. Accidental damage and shipping damage are not considered defects under the terms of the warranty. Russound assumes no responsibility for defects resulting from abuse or servicing performed by an agency or person not specifically authorized in writing by Russound. Damage to or destruction of components due to improper use voids the warranty. [. . . ] Contact Russound for ordering information.
857 INFRARED CONNECTING BLOCK IR CONFIRM
1 2
EMITTERS
3 4 5 6
5 Forbes Rd. Newmarket, NH 03857, USA Tel 603. 659. 5170 · Fax 603. 659. 5388
e-mail: tech@russound. com
Rev. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE RUSSOUND 862P PLASMA EYE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RUSSOUND 862P PLASMA EYE will begin.