User manual RUSSOUND ACT-1

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RUSSOUND ACT-1. We hope that this RUSSOUND ACT-1 user guide will be useful to you.


RUSSOUND ACT-1 : Download the complete user guide (292 Ko)

You may also download the following manuals related to this product:

   RUSSOUND ACT-1 DATASHEET (524 ko)

Manual abstract: user guide RUSSOUND ACT-1

Detailed instructions for use are in the User's Guide.

[. . . ] SPECIFICATIONS ACT-1 Current Rating: Circuit Breaker: 10 amps at 120VAC 10 amp re-settable ACT-1UK 10 amps at 230VAC 10 amp re-settable 1/8" male jack, tip(+), sleeve(-) 100mA at 12VDC 12. 5oz (. 4kg) 3 3/4"W x 2"H x 5"D (9. 5 x 5. 1 x 12. 7 cm) LIMITED WARRANTY The Russound ACT-1 and ACT-1UK are fully guaranteed for Two (2) years from the date of purchase against all defects in materials and workmanship. [. . . ] Russound assumes no responsibility for defects resulting from abuse or servicing performed by an agency or person not specifically authorized in writing by Russound. Damage to or destruction of components due to improper use voids the warranty. To return for repairs, the unit must be shipped to Russound at the owner's expense, along with a note explaining the nature of the service required. Be sure to pack in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit. 12VDC Input Connector: 1/8" male jack, tip(+), sleeve(-) Input DC Current: Weight: Dimensions: 100mA at 12VDC 12. 5oz (. 4kg) 3 3/4"W x 2"H x 5"D (9. 5 x 5. 1 x 12. 7 cm) NOTICE ACT-1 Must Mount Vertically. Newmarket, NH 03857, USA ¤ 603. 659. 5170 · Fax 603. 659. 5388 e-mail: tech@russound. com Come visit us at: ACT-1 ACT-1UK 12VDC Triggered AC Outlet ACT-1 Instruction Manual ACT-1 120VAC ACT-1UK 230VAC PRODUCT OVERVIEW The ACT-1 is a 12 Volt DC triggered 120 or 230 VAC outlet with a re-settable circuit breaker. The ACT-1 can switch up to 10 Amps to a power strip or a single component. When activated by a 12 Volt Trigger output (from an audio distribution system for example) the ACT-1 can be used to turn on the power to several audio components or other devices. CONNECTION INSTRUCTIONS Connect the ACT-1 to the component with the 12 Volt triggered ouput (rated at 100mA or greater) using an 1/8" jack. Plug the ACT-1 AC power cord into a standard 120VAC outlet (230VAC on UK model) and plug the component or power strip into the AC outlet on the side of the ACT-1. [. . . ] UK US 12V TRIG 100mA 12VDC Trigger Output from Audio Distribution System 120VAC Outlet [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE RUSSOUND ACT-1




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RUSSOUND ACT-1 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.