User manual RUSSOUND IRB-1

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual RUSSOUND IRB-1. We hope that this RUSSOUND IRB-1 user guide will be useful to you.


RUSSOUND IRB-1 : Download the complete user guide (139 Ko)

Manual abstract: user guide RUSSOUND IRB-1

Detailed instructions for use are in the User's Guide.

[. . . ] Instruction Manual IRB-1 IR RECEIVER CONNECTION Product Overview The IRB-1 provides an effective in-wall method to connect tabletop infrared receivers. IMPORTANT ­ Read the manuals that are included with the IR receivers and other IR equipment you intend to install with the IRB-1. [. . . ] Make sure that the drain wire of the cable is connected to the GND terminal of the input connector on the IR system's main connecting block. The drain wire does not need to be connected to the ground connection of the IRB-1. 2 IRB-1 848 J-BOX RECEIVER IRB-6 CONFIRM Figure 1 +12V OUT +V GND GND SIG CONFIRM V+ GND SIG 22 AWG 4 Conductor Sheilded Cable w/ Drain drain wire connected to GND terminal IR Receiver Connections 1) Connect the 3 conductor 1/8" plug of the tabletop IR receiver, such as Russound Pt. 844, to the 1/8" jack located on the front of the IRB-1 as shown in Figure 2. 2) Following the instructions that came with your IR receiver, place the IR receiver in a suitable location. Installation 1) Check all connections, and proper system operation before installing the IRB-1 into the wall. 2) Using the included hardware, install the IRB-1 into a standard electrical box. 844 TABLE TOP RECEIVER IR RECEIVER CONNECTION Figure 2 3 Limited Warranty The Russound IRB-1 is fully guaranteed for Two (2) years from the date of purchase against all defects in materials and workmanship. During this period Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor. For this warranty to apply, the unit must be installed and used according to its written instructions. The unit must be returned to Russound at the owner's expense and with prior written permission. Accidental damage and shipping damage are not considered defects under the terms of the warranty. [. . . ] Be sure to pack in a corrugated container with at least 3 inches of resilient material to protect the unit from damage in transit. 5 Forbes Rd. Newmarket, NH 03857, USA ¤ 603. 659. 5170 · Fax 603. 659. 5388 e-mail: tech@russound. com Come visit us at: 4 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE RUSSOUND IRB-1




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual RUSSOUND IRB-1 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.