User manual SAMSUNG HT-D5200

[. . . ] · The Mains plug is used as a disconnect device and shall stay readily operable at any time. · This apparatus shall always be connected to an AC outlet with a protective grounding connection. · To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION · INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. 2 English 2011-07-12 11:23:54 HT-D5200_XY_0712. indd 2 Precautions · Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product. [. . . ] · Allow (Valid Only) : The Internet connection is allowed only for BD-LIVE contents containing a valid certificate. · Prohibit : No Internet connection is allowed for any BD-LIVE content. One Foot Connection You can set up the wireless connection automatically if you have a Samsung Wireless Router which supports One Foot Connection. To connect using the One Foot Connection function, follow these steps: 1. Press the buttons to select One Foot Connection. Settings Network Settings Display Select a network connection type. Audio Network System Wireless Language (General) Security WPS(PBC) General One Foot Support Connection Connect to your wireless network automatically if your Wireless Router supports One Foot Connection. Select this connection type after placing the Wireless Router within 10 inches(25cm) of Samsung Wireless LAN Adapter. NOTE What is a valid certificate? When the product uses BD-LIVE to send the disc data and a request to the server to certify the disc, the server uses the transmitted data to check if the disc is valid and sends the certificate back to the product. Wired The Internet connection may be restricted while you are using BD-LIVE contents. > Move " Enter ' Return System 2. Place the Samsung Wireless Router within 25 cm (10 inches) of Samsung Wireless LAN Adapter to connect. Wait until the connection is automatically established. Initial Settings By using the Initial Settings function, you can set the language, Network Settings, etc. For more information about the Initial Settings function, refer to the Initial Settings section of this user manual. (See page 24) 36 English 2011-07-12 11:24:18 HT-D5200_XY_0712. indd 36 03 Setup Anynet+ (HDMI-CEC) Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature. To operate this function, connect this product to a Samsung TV with an HDMI cable. Install the Samsung network remote control application to control your product on your compatible portable device. Make sure your portable device and your product are connected to the same wireless router. Select the product. BD Parental Rating This will prohibit playback of Blu-ray disc rated above Parental Rating. DVD Parental Rating Prevent playback of DVD discs with specific numerical ratings unless a password is entered. 38 English 2011-07-12 11:24:21 HT-D5200_XY_0712. indd 38 03 6. If this is the first time you are using the function, it will ask you to allow or deny remote control of the product. Follow the instructions that came with the application to control the product. NOTE Setup Your product must be connected to the Internet to use the By Internet function. The upgrade is complete when the product turns off, and then turns on again by itself. Never turn the product off or back on Support manually during the update process. Software Upgrade The Software Upgrade menu allows you to upgrade the product's software for performance improvements or additional services. You can upgrade in four ways: · · · · By Internet By USB By Disc Via download (File) Samsung Electronics shall take no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade. If you want to cancel the upgrade while the upgrade software is downloading, press the ENTER button. By USB To upgrade by USB, follow these steps: 1. Download the latest USB software upgrade zip archive to your computer. Make sure the disc tray is empty, and then insert the USB flash drive into the USB port of the product. In the product's menu, go to Settings > Support > Software Upgrade. Select By USB. The four methods are explained below. By Internet To upgrade by Internet, follow these steps: 1. If there is a download available, the Download pop-up appears with a progress bar and the download starts. [. . . ] · If the OPEN/CLOSE ( ) button is pressed while listening to TV audio using the D. IN or AUX functions, the BD/DVD functions are turned on and the TV audio is muted. · The features or action cannot be completed at this time because: 1. The BD/DVD's software doesn't support the feature (e. g. , angles) 3. [. . . ]