User manual SAMSUNG NL20J7100WB/UR

[. . . ] Repairs and maintenance, especially of parts carrying electrical current, must only be done by technicians authorised by the manufacturer. The manufacturer and retailers do not accept responsibility for any damaged caused to people, animals or property as a result of repairs and maintenance carried out by nonauthorised personnel. Repairs undertaken during the guarantee period must only be done by technicians authorised by the manufacturer. If this is not the case then any damage resulting from the repair in question is excluded from the guarantee. [. . . ] Before using the warming drawer for the first time, remove this film carefully. Attention: the power socket should be easily accessible after the warming drawer has been installed. The warming drawer should only be built-in in combination with those appliances indicated by the manufacturer. If it is fitted in combination with other appliances, the guarantee is no longer valid since it is impossible to guarantee that the warming drawer will work correctly. installation To build-in the warming drawer in combination with another appliance there must be a fixed, interim shelf in the housing unit to support the weight of both appliances. The appliance to be combined with the warming drawer will be placed directly on the latter without any need to have a separating shelf. To build-in the appliance which is combined with the warming drawer, follow the instructions set out in the respective instructions and fitting booklet. The relevant installation dimensions are indicated in mm in the diagrams shown at the end of this booklet. Place the warming drawer on the shelf and slide it towards the interior of the niche in such a way that it is centred and completely lined up with the front of the unit. Check that the warming drawer frame is properly levelled and is sitting evenly on the shelf. Open the drawer and fix the warming drawer to the sides of the unit using the two screws provided. electrical Connection The warming drawer is equipped with a power cable and plug for single phase current. We advise that the plug is connected to a socket that is easily accessible after installation. If the warming drawer is to be installed on a permanent basis it should be installed by a qualified technician. In such a case, the appliance should be connected to a circuit with an all-pole circuit breaker with a minimum separation of 3 mm between contacts. The data necessary for the electrical connection are described on the warming drawer characteristics plate and these must be compatible with those of the power outlet you are going to use. The manufacturer and retailers do not accept responsibility for any damage that may be caused to people, animals or property if these installation instructions are not observed. How the warming drawer works This appliance is equipped with a warm air circulation system. A fan distributes the heat generated by an electrical heating element throughout the interior of the appliance. The thermostat allows the user to define and control the temperature wanted for the crockery. The circulating hot air that is generated heats up the crockery quickly and evenly. The base of the drawer is fitted with a non-slip mat to prevent plates and dishes sliding around when the drawer is opened and closed. [. . . ] These products prevent the surfaces becoming dirty again for some time. Apply a thin layer of such a product on the surface using a soft cloth. On aluminium fronted warming drawer use a gentle glass cleaning product and a soft cloth that does not release fluff. Wipe horizontally without pressing on the surface since aluminium is sensitive to scratches and cuts. [. . . ]