Detailed instructions for use are in the User's Guide.
[. . . ] BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:
To maintain safety: To ensure the safe operation of this product, be sure to read the following before usage. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. Be sure to keep this manual close to the product or in a convenient place for future reference. [. . . ] · Wearappropriateworkclothingsothatworkcanbeperformedsafely. Usegloves andsafetyshoestopreventaccidentsorinjuries. · Wheninstallingawireprotectioncoveroverafloor, useamaterialshaped sothatnoonepassingbywillstumbleoverit. Usingamaterialthatcouldbe stumbledovermightleadtoanaccidentalfall. · Handleplasticpartswithcare. Excessiveweightorpressuremaycausethemto breakandthebrokenpiecesmaycauseinjury.
6 ASSEMBLYANDINSTALLATION
10
6-1 INSTALLATION
3 kinds as below.
FULL KIT
Atomiswave Main PCB included. This KIT will be able to install to Basic CRT monitor UR cabinets with JAMMA connector on Main harness. Mount 28"Shotgun Assy (2), SOUND BD(1), START PUSH BUTTON (2) GUN HOLSTER (2 sets) and harnesses to your cabinet. Place ATOMISWAVE MAIN PCB with EX I/O CARTRIDGE and GAME ROM CARTRIDGE.
6 ASSEMBLYANDINSTALLATION
UPDATEKITWITHGUNS
Your cabinet must have ATOMISWAVE MAIN PCB and EX I/O CARTRIDGE in the cabinet. Mount 28"Shotgun Assy (2), SOUND BD(1), START PUSH BUTTON (2) GUN HOLSTER (2 sets) and harnesses to your cabinet. Make sure EX I/O CARTRIDGE on there.
UPDATEKITWITHOUTGUNS
Your cabinet must have ATOMISWAVE MAIN PCB, EX I/O CARTRIDGE and 28"Shotgun Assy (2) in your cabinet. Make sure EX I/O CARTRIDGE on there.
11
Exampleofcabinetoverview
6 ASSEMBLYANDINSTALLATION
12
6-2TURNINGONTHEPOWER
· Thefollowingexplanationassumesthattheproducthasbeenassembled properlyasexplainedabove. Ifthereisanerrororiftheproductoperatesina mannerotherthanasindicatedbelow, cutoffthepowersupplyimmediately. Failuretodosomayresultinafireorelectricalshock.
6 ASSEMBLYANDINSTALLATION
1 2 3 4
Turn the main power switch on to power up.
The monitor will display an advertize screen.
The Marquee panel and push buttons will light up. (Depends of cabinet type)
The sound will be output from both left and right speakers on the cabinet.
13
6-3CHECKINGASSEMBLY(SETUP)
CheckingAssembly
In the TEST MODE, ensure that the assembly has been made correctly and the connecting board, and input and output device are satisfactory. (Refer to 9-3 "TEST MODE")
6 ASSEMBLYANDINSTALLATION
(1)COLOR TEST In the TEST mode menu, selecting COLOR TEST allows the screen (on which the monitor is tested) to be displayed. Adjust the monitor, if it is necessary.
(2)CROSS HATCH In the TEST mode menu, selecting CROSS HATCH allows the screen (on which the monitor is sized) to be displayed. Adjust the monitor, if it is necessary.
14
(3)SOUND TEST In the TEST mode menu, selecting SOUND TEST allows the screen (on which the monitor is tested sound) to be displayed. ADJUSTMENT OF SOUND VOLUME Use dial adjustment volume on Main PCB to adjusting the volume og game.
6 ASSEMBLYANDINSTALLATION
(4)I/O TEST AND GUN ADJUST In the TEST mode menu, selecting I/O TEST allows the screen (on which the monitor is tested controller sight adjustment and input device) to be displayed. Prior to letting customers use the game, you must play a game and make sure that everything is operating correctly. Refer to 9-3-4 "I/O TEST AND GUN ADJUST" about controller sight adjustment details. If the display next to the input device changes to be "ON", switches and connections are working correctly.
15
7 8 PRECAUTIONSWHENMOVINGTHEMACHINE
· When moving the machine, be sure to pull out the plug from the power supply. Moving the machinewiththeplugstillinsertedcancausethepowercordtobedamaged, resultinginafire and/or electric shock.
7 PRECAUTIONSWHENMOVINGTHEMACHINE
·Whenmovingthemachineonthefloor, retracttheadjusters, andensurethatthecastersmake contactwiththefloor. Paycarefulattentionsothatthecastersdonotrunoverpowercordsand earthwires. Damagingthepowercordscancauseanelectricshockand/orshortcircuit. ·Whenmovingthecabinet, donotpushitfromtheside. Pushitfromtheback. Pushingthecabinetfromthesidecanhavethecabinetfalldown, causingpersonalinjury, etc. Incasethefloorhasslantedsurfacesorstep-likedifferences, besuretomovethemachine by2ormorepersons. ·Whendetachedalwayskeepthecabinetonalevelsurfaceandmakesureitdoesnotstarttolean to the left or right whilst working on it.
Do not push on any parts made of glass or plastic, as these parts may break and resultinbodilyinjury.
Whenmovingthecabinetdonotholdorpushtheonitorpanel. Thiscoulddeformtheirshape or cause damage to them. [. . . ] · Becarefulnottodamagethewires. Damagedwiresmaycauseelectricshock orshortcircuitorpresentafirerisk. · Whenreplacingorrepairingthegameboardandthenreturningittothe cabinet, besuretoreconnectalltheconnectorscorrectly. Improperconnection maycauseelectricshock, shortcircuitorfire. · Whenconnectingtheconnector, checktheorientationcarefullyandconnect securely. Theconnectormustbeconnectedintheproperdirection. Ifitis connectedinthewrongdirectionorindiscriminatelyataninclinesothata loadisapplied, theconnectororitsterminalpinscouldbreak, causingashort circuitorfire. · Noconnectorsotherthanthoseconnectedonthegameboardwhenfirst deliveredcanbeusedbythisproduct. Donotconnectanyotherwirestoany oftheunusedconnections. Thismayleadtothegenerationofheat, smokeor burnouts. [. . . ]